lkml.org 
[lkml]   [2018]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 16/21] regulator: wm8994: Pass descriptor instead of GPIO number
Date
Instead of passing a global GPIO number for the enable GPIO, pass
a descriptor looked up from the device tree node or the board file
decriptor table for the regulator.

There is a single board file passing the GPIOs for LDO1 and LDO2
through platform data, so augment this to pass descriptors
associated with the i2c device as well.

Cc: patches@opensource.cirrus.com
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Lee: this patch is touching the MFD core driver for WM8994,
but as with all other patches we just change the regulator
parts. Would be nice if you could ACK it.
---
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 18 ++++++++++++++++--
drivers/mfd/wm8994-core.c | 9 ---------
drivers/regulator/wm8994-regulator.c | 19 +++++++++++--------
include/linux/mfd/wm8994/pdata.h | 3 ---
4 files changed, 27 insertions(+), 22 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index f00988705408..a4db97f156d7 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -9,6 +9,7 @@
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
+#include <linux/gpio/machine.h>

#include <linux/mfd/wm831x/irq.h>
#include <linux/mfd/wm831x/gpio.h>
@@ -193,8 +194,8 @@ static struct wm8994_pdata wm8994_pdata = {
0x3, /* IRQ out, active high, CMOS */
},
.ldo = {
- { .enable = S3C64XX_GPN(6), .init_data = &wm8994_ldo1, },
- { .enable = S3C64XX_GPN(4), .init_data = &wm8994_ldo2, },
+ { .init_data = &wm8994_ldo1, },
+ { .init_data = &wm8994_ldo2, },
},
};

@@ -202,6 +203,18 @@ static const struct i2c_board_info wm1277_devs[] = {
{ I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */
.platform_data = &wm8994_pdata,
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ .dev_name = "wm8958",
+ },
+};
+
+static struct gpiod_lookup_table wm8994_gpiod_table = {
+ .dev_id = "i2c-wm8958", /* I2C device name */
+ .table = {
+ GPIO_LOOKUP("GPION", 6,
+ "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPION", 4,
+ "wlf,ldo2ena", GPIO_ACTIVE_HIGH),
+ { },
},
};

@@ -366,6 +379,7 @@ static int wlf_gf_module_probe(struct i2c_client *i2c,
rev == gf_mods[i].rev))
break;

+ gpiod_add_lookup_table(&wm8994_gpiod_table);
if (i < ARRAY_SIZE(gf_mods)) {
dev_info(&i2c->dev, "%s revision %d\n",
gf_mods[i].name, rev + 1);
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 953d0790ffd5..c409464231f6 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -21,7 +21,6 @@
#include <linux/mfd/core.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
@@ -302,14 +301,6 @@ static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
if (of_find_property(np, "wlf,ldoena-always-driven", NULL))
pdata->lineout2fb = true;

- pdata->ldo[0].enable = of_get_named_gpio(np, "wlf,ldo1ena", 0);
- if (pdata->ldo[0].enable < 0)
- pdata->ldo[0].enable = 0;
-
- pdata->ldo[1].enable = of_get_named_gpio(np, "wlf,ldo2ena", 0);
- if (pdata->ldo[1].enable < 0)
- pdata->ldo[1].enable = 0;
-
return 0;
}
#else
diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c
index 7a4ce6df4f22..d3a5f48119c2 100644
--- a/drivers/regulator/wm8994-regulator.c
+++ b/drivers/regulator/wm8994-regulator.c
@@ -19,7 +19,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/slab.h>

#include <linux/mfd/wm8994/core.h>
@@ -129,6 +129,7 @@ static int wm8994_ldo_probe(struct platform_device *pdev)
int id = pdev->id % ARRAY_SIZE(pdata->ldo);
struct regulator_config config = { };
struct wm8994_ldo *ldo;
+ struct gpio_desc *gpiod;
int ret;

dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
@@ -145,12 +146,14 @@ static int wm8994_ldo_probe(struct platform_device *pdev)
config.driver_data = ldo;
config.regmap = wm8994->regmap;
config.init_data = &ldo->init_data;
- if (pdata) {
- config.ena_gpio = pdata->ldo[id].enable;
- } else if (wm8994->dev->of_node) {
- config.ena_gpio = wm8994->pdata.ldo[id].enable;
- config.ena_gpio_initialized = true;
- }
+
+ /* Look up LDO enable GPIO from the parent device node */
+ gpiod = devm_gpiod_get_optional(pdev->dev.parent,
+ id ? "wlf,ldo2ena" : "wlf,ldo1ena",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod))
+ return PTR_ERR(gpiod);
+ config.ena_gpiod = gpiod;

/* Use default constraints if none set up */
if (!pdata || !pdata->ldo[id].init_data || wm8994->dev->of_node) {
@@ -159,7 +162,7 @@ static int wm8994_ldo_probe(struct platform_device *pdev)

ldo->init_data = wm8994_ldo_default[id];
ldo->init_data.consumer_supplies = &ldo->supply;
- if (!config.ena_gpio)
+ if (!gpiod)
ldo->init_data.constraints.valid_ops_mask = 0;
} else {
ldo->init_data = *pdata->ldo[id].init_data;
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index 90c60524a496..fca67bd194e2 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -20,9 +20,6 @@
#define WM8994_NUM_AIF 3

struct wm8994_ldo_pdata {
- /** GPIOs to enable regulator, 0 or less if not available */
- int enable;
-
const struct regulator_init_data *init_data;
};

--
2.14.3
\
 
 \ /
  Last update: 2018-02-12 14:20    [W:0.276 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site