Messages in this thread |  | | Subject | Re: [PATCH 1/3] arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes | From | Philipp Rossak <> | Date | Sun, 11 Feb 2018 23:15:02 +0100 |
| |
Am Freitag, den 09.02.2018, 18:52 +0100 schrieb Philipp Rossak: > This patch updates the vmmc-supply properties on the mmc0 and mmc2 > node to use the allready existent regulators. > We can now remove the sunxi-common-regulators.dtsi include since we > don't need it anymore. > > Signed-off-by: Philipp Rossak <embed3d@gmail.com> > --- > arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts > b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts > index 51e6f1d21c32..a8d86211c8f3 100644 > --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts > +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts > @@ -42,7 +42,6 @@ > > /dts-v1/; > #include "sun6i-a31s.dtsi" > -#include "sunxi-common-regulators.dtsi" > #include <dt-bindings/gpio/gpio.h> > > / { > @@ -118,7 +117,7 @@ > &mmc0 { > pinctrl-names = "default"; > pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; > - vmmc-supply = <®_vcc3v0>; > + vmmc-supply = <®_dcdc1>; > bus-width = <4>; > cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ > cd-inverted; > @@ -132,7 +131,7 @@ > &mmc2 { > pinctrl-names = "default"; > pinctrl-0 = <&mmc2_pins_a>; > - vmmc-supply = <®_vcc3v0>; > + vmmc-supply = <®_dcdc1>; ^^ this here is wrong! this should be ®_aldo1 > mmc-pwrseq = <&mmc2_pwrseq>; > bus-width = <4>; > non-removable;
Philipp
|  |