lkml.org 
[lkml]   [2018]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/4] iio: adc: add STMPE ADC devicetree bindings
On Thu, 06 Dec 2018 16:49:33 +0100
Philippe Schenker <dev@pschenker.ch> wrote:

> On Sun, 2018-11-25 at 10:04 +0000, Jonathan Cameron wrote:
> > On Fri, 23 Nov 2018 15:24:10 +0100
> > Philippe Schenker <dev@pschenker.ch> wrote:
> >
> > > From: Stefan Agner <stefan@agner.ch>
> > >
> > > This adds the devicetree bindings for the STMPE ADC.
> > >
> > > Signed-off-by: Stefan Agner <stefan@agner.ch>
> > > Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
> > > Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> > Clearly this will need review from input and mfd.
> >
> > I've suggested inline that you split the realignment out to a
> > separate patch for reviewability reasons.
>
> Thank you again Jonathan for your feedback, and of course also all the others!
>
> I will split it much more so everything will be much more readable in v4. You
> suggested again, to use the naming 'adc {'. I know that this is standard naming,
> but unfortunately, this naming is given by drivers/mfd/stmpe.c (line 1311).
> What do you suggest to do? break the naming scheme in mfd, or just use
> 'stmpe_adc {' ?
Leave it as it is, but add a note ideally to say that is the reason.

Jonathan
>
> >
> > > ---
> > >
> > > Changes in v3:
> > > - Reformatted documentation for touchscreen to use tabs and have a better
> > > overview of the settings.
> > > - Added note which adc-settings will take precedence.
> > > - changed typo in sample-time setting from 144 clocks to 124 clocks, as
> > > stated
> > > in the datasheet.
> > >
> > > Changes in v2:
> > > - Moved the bindings for ADC to the overlying mfd.
> > > - Reformatted for better readability
> > >
> > > .../devicetree/bindings/iio/adc/stmpe-adc.txt | 21 +++++++
> > > .../bindings/input/touchscreen/stmpe.txt | 60 ++++++++++++-------
> > > .../devicetree/bindings/mfd/stmpe.txt | 28 ++++++---
> > > 3 files changed, 80 insertions(+), 29 deletions(-)
> > > create mode 100644 Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
> > > b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
> > > new file mode 100644
> > > index 000000000000..480e66422625
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
> > > @@ -0,0 +1,21 @@
> > > +STMPE ADC driver
> > > +----------------
> > > +
> > > +Required properties:
> > > + - compatible: "st,stmpe-adc"
> > > +
> > > +Optional properties:
> > > +Note that the ADC is shared with the STMPE touchscreen. ADC related
> > > settings
> > > +have to be done in the mfd.
> > > +- st,norequest-mask: bitmask specifying which ADC channels should _not_ be
> > > + requestable due to different usage (e.g. touch)
> > > +
> > > +Node name must be stmpe_adc and should be child node of stmpe node to
> > > +which it belongs.
> > > +
> > > +Example:
> > > +
> > > + stmpe_adc {
> >
> > Can we use adc { here to match standard naming?
> >
> > > + compatible = "st,stmpe-adc";
> > > + st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
> > > + };
> > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
> > > b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
> > > index 127baa31a77a..414586513a02 100644
> > > --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
> > > +++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
> > > @@ -5,36 +5,52 @@ Required properties:
> > > - compatible: "st,stmpe-ts"
> > >
> > > Optional properties:
> > > -- st,sample-time: ADC converstion time in number of clock. (0 -> 36
> > > clocks, 1 ->
> > > - 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96
> > > clocks, 6
> > > - -> 144 clocks), recommended is 4.
> > > -- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
> > > -- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external
> > > - reference)
> > > -- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 ->
> > > 6.5 MHz)
> > > -- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 ->
> > > 4
> > > - samples, 3 -> 8 samples)
> > > -- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us,
> > > 2 ->
> > > - 100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms)
> > > recommended
> > > - is 3
> > > -- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 ->
> > > 500 us, 3
> > > - -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is
> > > 2
> > > -- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) =
> > > Count of
> > > - the fractional part) recommended is 7
> > > -- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA
> > > typical 35
> > > - mA max, 1 -> 50 mA typical 80 mA max)
> > > +- st,ave-ctrl : Sample average control
> > > + 0 -> 1 sample
> > > + 1 -> 2 samples
> > > + 2 -> 4 samples
> > > + 3 -> 8 samples
> > > +- st,touch-det-delay : Touch detect interrupt delay (recommended is
> > > 3)
> > > + 0 -> 10 us 5 -> 5 ms
> > > + 1 -> 50 us 6 -> 10 ms
> > > + 2 -> 100 us 7 -> 50 ms
> > > + 3 -> 500 us
> > > + 4-> 1 ms
> > > +- st,settling : Panel driver settling time (recommended is 2)
> > > + 0 -> 10 us 5 -> 10 ms
> > > + 1 -> 100 us 6 for 50 ms
> > > + 2 -> 500 us 7 -> 100 ms
> > > + 3 -> 1 ms
> > > + 4 -> 5 ms
> > > +- st,fraction-z : Length of the fractional part in z
> > > (recommended is 7)
> > > + (fraction-z ([0..7]) = Count of the fractional part)
> > > +- st,i-drive : current limit value of the touchscreen drivers
> > > + 0 -> 20 mA (typical 35mA max)
> > > + 1 -> 50 mA (typical 80 mA max)
> > > +
> > > +Optional properties common with MFD (deprecated):
> > > + - st,sample-time : ADC conversion time in number of clock.
> > > + 0 -> 36 clocks 4 -> 80 clocks
> > > (recommended)
> > > + 1 -> 44 clocks 5 -> 96 clocks
> > > + 2 -> 56 clocks 6 -> 124 clocks
> > > + 3 -> 64 clocks
> > > + - st,mod-12b : ADC Bit mode
> > > + 0 -> 10bit ADC 1 -> 12bit ADC
> > > + - st,ref-sel : ADC reference source
> > > + 0 -> internal 1 -> external
> > > + - st,adc-freq : ADC Clock speed
> > > + 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz
> > > + 1 -> 3.25 MHz
> > >
> > > Node name must be stmpe_touchscreen and should be child node of stmpe node
> > > to
> > > which it belongs.
> > >
> > > +Note that common ADC settings of stmpe_touchscreen will take precedence.
> > > +
> > > Example:
> > >
> > > stmpe_touchscreen {
> > > compatible = "st,stmpe-ts";
> > > - st,sample-time = <4>;
> > > - st,mod-12b = <1>;
> > > - st,ref-sel = <0>;
> > > - st,adc-freq = <1>;
> > > st,ave-ctrl = <1>;
> > > st,touch-det-delay = <2>;
> > > st,settling = <2>;
> > > diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt
> > > b/Documentation/devicetree/bindings/mfd/stmpe.txt
> > > index c797c05cd3c2..d4408a417193 100644
> > > --- a/Documentation/devicetree/bindings/mfd/stmpe.txt
> > > +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
> > > @@ -4,15 +4,29 @@ STMPE is an MFD device which may expose the following
> > > inbuilt devices: gpio,
> > > keypad, touchscreen, adc, pwm, rotator.
> > >
> > > Required properties:
> > > - - compatible :
> > > "st,stmpe[610|801|811|1600|1601|2401|2403]"
> > > - - reg : I2C/SPI address of the device
> > > + - compatible :
> > > "st,stmpe[610|801|811|1600|1601|2401|2403]"
> > > + - reg : I2C/SPI address of the device
> >
> > Nothing wrong with correcting alignment, but it shouldn't be in the same patch
> > as a fundamental change lie this. Just adds noise.
> >
> > If that means you first have to introduce the new block missaligned, then
> > fix up the alignment in a follow up patch, then do that as we can then
> > effectively ignore the realignment as obviously correct and focus on
> > the real changes.
> >
> > >
> > > Optional properties:
> > > - - interrupts : The interrupt outputs from the controller
> > > - - interrupt-controller : Marks the device node as an interrupt
> > > controller
> > > - - wakeup-source : Marks the input device as wakable
> > > - - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128,
> > > 256, 512 and 1024
> > > - - irq-gpio : If present, which GPIO to use for event
> > > IRQ
> > > + - interrupts : The interrupt outputs from the
> > > controller
> > > + - interrupt-controller : Marks the device node as an interrupt
> > > controller
> > > + - wakeup-source : Marks the input device as wakable
> > > + - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64,
> > > 128, 256, 512 and 1024
> > > + - irq-gpio : If present, which GPIO to use for
> > > event IRQ
> > > +
> > > +Optional properties for devices with touch and ADC (STMPE811|STMPE610):
> > > + - st,sample-time : ADC conversion time in number of clock.
> > > + 0 -> 36 clocks 4 -> 80
> > > clocks (recommended)
> > > + 1 -> 44 clocks 5 -> 96
> > > clocks
> > > + 2 -> 56 clocks 6 -> 124
> > > clocks
> > > + 3 -> 64 clocks
> > > + - st,mod-12b : ADC Bit mode
> > > + 0 -> 10bit ADC 1 -> 12bit
> > > ADC
> > > + - st,ref-sel : ADC reference source
> > > + 0 -> internal 1 ->
> > > external
> > > + - st,adc-freq : ADC Clock speed
> > > + 0 -> 1.625 MHz 2 || 3 ->
> > > 6.5 MHz
> > > + 1 -> 3.25 MHz
> > >
> > > Example:
> > >
>

\
 
 \ /
  Last update: 2018-12-08 11:56    [W:0.055 / U:8.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site