lkml.org 
[lkml]   [2018]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/3] tty/serial: Add RISC-V SBI earlycon support
From
On Tue, 04 Dec 2018 05:55:05 PST (-0800), anup@brainfault.org wrote:
> In RISC-V, the M-mode runtime firmware provide SBI calls for
> debug prints. This patch adds earlycon support using RISC-V
> SBI console calls. To enable it, just pass "earlycon=sbi" in
> kernel parameters.
>
> Signed-off-by: Anup Patel <anup@brainfault.org>
> ---
> drivers/tty/serial/Kconfig | 12 +++++++++++
> drivers/tty/serial/Makefile | 1 +
> drivers/tty/serial/earlycon-riscv-sbi.c | 28 +++++++++++++++++++++++++
> 3 files changed, 41 insertions(+)
> create mode 100644 drivers/tty/serial/earlycon-riscv-sbi.c
>
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 32886c304641..287bb41ac814 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -85,6 +85,18 @@ config SERIAL_EARLYCON_ARM_SEMIHOST
> with "earlycon=smh" on the kernel command line. The console is
> enabled when early_param is processed.
>
> +config SERIAL_EARLYCON_RISCV_SBI
> + bool "Early console using RISC-V SBI"
> + depends on RISCV
> + select SERIAL_CORE
> + select SERIAL_CORE_CONSOLE
> + select SERIAL_EARLYCON
> + help
> + Support for early debug console using RISC-V SBI. This enables
> + the console before standard serial driver is probed. This is enabled
> + with "earlycon=sbi" on the kernel command line. The console is
> + enabled when early_param is processed.
> +
> config SERIAL_SB1250_DUART
> tristate "BCM1xxx on-chip DUART serial support"
> depends on SIBYTE_SB1xxx_SOC=y
> diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
> index daac675612df..3ce26ce08616 100644
> --- a/drivers/tty/serial/Makefile
> +++ b/drivers/tty/serial/Makefile
> @@ -7,6 +7,7 @@ obj-$(CONFIG_SERIAL_CORE) += serial_core.o
>
> obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
> obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
> +obj-$(CONFIG_SERIAL_EARLYCON_RISCV_SBI) += earlycon-riscv-sbi.o
>
> # These Sparc drivers have to appear before others such as 8250
> # which share ttySx minor node space. Otherwise console device
> diff --git a/drivers/tty/serial/earlycon-riscv-sbi.c b/drivers/tty/serial/earlycon-riscv-sbi.c
> new file mode 100644
> index 000000000000..e1a551aae336
> --- /dev/null
> +++ b/drivers/tty/serial/earlycon-riscv-sbi.c
> @@ -0,0 +1,28 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * RISC-V SBI based earlycon
> + *
> + * Copyright (C) 2018 Anup Patel <anup@brainfault.org>
> + */
> +#include <linux/kernel.h>
> +#include <linux/console.h>
> +#include <linux/init.h>
> +#include <linux/serial_core.h>
> +#include <asm/sbi.h>
> +
> +static void sbi_console_write(struct console *con,
> + const char *s, unsigned int n)
> +{
> + int i;
> +
> + for (i = 0; i < n; ++i)
> + sbi_console_putchar(s[i]);
> +}
> +
> +static int __init early_sbi_setup(struct earlycon_device *device,
> + const char *opt)
> +{
> + device->con->write = sbi_console_write;
> + return 0;
> +}
> +EARLYCON_DECLARE(sbi, early_sbi_setup);

Reviewed-by: Palmer Dabbelt <palmer@sifive.com>

\
 
 \ /
  Last update: 2018-12-07 19:30    [W:0.114 / U:2.940 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site