[lkml]   [2018]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] ARM: OMAP1: ams-delta: Fix audio permanently muted
* Janusz Krzysztofik <> [181123 03:18]:
> Since commit 1137ceee76ba ("ARM: OMAP1: ams-delta: Don't request unused
> GPIOs"), on-board audio has appeared muted. Believed to be unused GPIO
> pin "hookflash1", apparently set high regardless of the corresponding
> bit of "latch2" port attempted to be set low during .init_machine(),
> has been identified as the reason.
> According to Amstrad E3 wiki, the purpose of the pin hasn't been
> clearly identified. Original Amstrad software used to produce a high
> pulse on it when the phone was taken off hook or recall was pressed.
> With the current finding, we can assume the pin provides a kind of
> audio mute function.
> Proper resolution of the issue should be done in two steps:
> - resolution of an issue with the pin state not reflecting the value
> the corresponding bit of the port was attempted to be initialized
> with,
> - extension of on-board audio driver with a new control.
> For now, rename the pin to "audio_mute" to reflect its function and,
> as a quick fix, hogg it as output low so on-board audio can produce
> audible sound again.
> Fixes: 1137ceee76ba ("ARM: OMAP1: ams-delta: Don't request unused GPIOs")
> Signed-off-by: Janusz Krzysztofik <>

Adding into omap-for-v4.20/fixes thanks.


 \ /
  Last update: 2018-12-07 17:54    [W:0.041 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site