lkml.org 
[lkml]   [2018]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/2] dt-binding: spi: Document Renesas R-Car Gen3 RPC controller bindings
From
Date
Hello!

On 12/07/2018 02:13 PM, Mason Yang wrote:

> Document the bindings used by the Renesas R-Car Gen3 RPC controller.
>
> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
> ---
> .../devicetree/bindings/spi/spi-renesas-rpc.txt | 38 ++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
>
> diff --git a/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
> new file mode 100644
> index 0000000..a191f70
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
> @@ -0,0 +1,38 @@
> +Renesas R-Car Gen3 RPC controller Device Tree Bindings
> +------------------------------------------------------
> +
> +Required properties:
> +- compatible: should be "renesas,r8a77995-rpc"
> +- #address-cells: should be 1
> +- #size-cells: should be 0
> +- reg: should contain 2 entries, one for the registers and one for the direct
> + mapping area
> +- reg-names: should contain "rpc_regs" and "dirmap"

Please drop this "rpc_" thing, I think "regs" should be enough.

> +- interrupts: interrupt line connected to the RPC controller
> +- clock-names: should contain "clk_rpc"

Please drop this "clk_" thing. BTW, what's with the RPCD2 clock?

> +- clocks: should contain 1 entries for the module's clock
> +- rpc-mode: should contain "rpc-spi-flash" for rpc spi mode or
> + "rpc-hyperflash" for rpc hyerflash mode.

I think the prop should be called "renesas,rpc-mode" and the values should be
just "spi" and "hyperflash".

[...]

MBR, Sergei

\
 
 \ /
  Last update: 2018-12-07 17:04    [W:0.824 / U:0.328 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site