[lkml]   [2018]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [ v3 2/3] mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver
Hi Christophe,

On Thu, Nov 29, 2018 at 5:42 PM Christophe Kerello
<> wrote:

> +/* FMC2 Controller Registers */
> +#define FMC2_BCR1 0x0
> +#define FMC2_PCR 0x80
> +/* Register: FMC2_BCR1 */
> +#define FMC2_BCR1_FMC2EN BIT(31)

Well this looks like an especially clever register map and a specific choice
of bit 31 in the fist register to activate FMC2. Registers 0x04 thru
0x7c are completely unused save for one bit.

It's almost like this is the good old FSMC integrated in parallel with FMC2,
so that if you don't set bit 31, this becomes something that can be used
with drivers/mtd/nand/raw/fsmc_nand.c, and FMC2 mode is activated
by setting this bit, activating all the new registers.

It wouldn't surprise me given how HW designers like to work.

Is this the case?

If that is the case I think it should at least be mentioned in commit
logs and DT bindings and possibly in a comment on the driver

Linus Walleij

 \ /
  Last update: 2018-12-07 10:07    [W:0.142 / U:5.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site