lkml.org 
[lkml]   [2018]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 11/14] pinctrl: milbeaut: Add Milbeaut M10V pinctrl
Hi Sugaya-san

On Mon, Nov 19, 2018 at 10:01 AM Sugaya Taichi
<sugaya.taichi@socionext.com> wrote:
>
> Add Milbeaut M10V pinctrl.
> The M10V has the pins that can be used GPIOs or take multiple other
> functions.
>
> Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>


This patch was sent to:

linux-clk@vger.kernel.org,
devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
linux-serial@vger.kernel.org




Unfortunately, the most important ML

linux-gpio@vger.kernel.org

was not addressed.


The pinctrl maintainer may not notice this patch.







> diff --git a/drivers/pinctrl/pinctrl-m10v.c b/drivers/pinctrl/pinctrl-m10v.c
> new file mode 100644
> index 0000000..d4ca713
> --- /dev/null
> +++ b/drivers/pinctrl/pinctrl-m10v.c
> @@ -0,0 +1,765 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 Socionext Ltd.
> + * Copyright (C) 2015 Linaro Ltd.
> + * Author: Jassi Brar <jaswinder.singh@linaro.org>


My company name is "Socionext Inc." instead of "Socionext Ltd."







> +static struct platform_driver m10v_pinctrl_driver = {
> + .probe = m10v_pinctrl_probe,
> + .driver = {
> + .name = "m10v-pinctrl",
> + .of_match_table = m10v_pmatch,
> + },
> +};
> +
> +static int __init m10v_pinctrl_init(void)
> +{
> + return platform_driver_register(&m10v_pinctrl_driver);
> +}
> +arch_initcall(m10v_pinctrl_init);


Can't it be builtin_platform_driver()?

Which device requires this to be arch_initcall()?





--
Best Regards
Masahiro Yamada

\
 
 \ /
  Last update: 2018-12-04 12:24    [W:0.130 / U:43.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site