lkml.org 
[lkml]   [2018]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5 7/8] arm64: dts: sdm845: Add rpmh powercontroller node
Date
Quoting Rajendra Nayak (2018-12-03 21:21:18)
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index b72bdb0a31a5..a6d0cd8d17b0 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -1324,6 +1325,56 @@
> compatible = "qcom,sdm845-rpmh-clk";
> #clock-cells = <1>;
> };
> +
> + rpmhpd: power-controller {
> + compatible = "qcom,sdm845-rpmhpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmhpd_opp_table>;
> + };
> +
> + rpmhpd_opp_table: opp-table {

This table should go somewhere else? I don't understand why it's in the
rpmh node because it's not an rpmh device. Does it go to the root? Or
does it go under rpmhpd itself? I'm not sure.

\
 
 \ /
  Last update: 2018-12-05 00:17    [W:0.168 / U:2.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site