lkml.org 
[lkml]   [2018]   [Dec]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subjecttsc: Fast TSC calibration failed with AMD B350M/Ryzen 3 2200G
Date
Dear Linux folks,


Linux 4.19.13 from Debian Sid/unstable logs the message below on the
board MSI MS-7A37/B350M MORTAR with the processor AMD Ryzen 3 2200G.

As a result, the early time stamps do not seem to be working.

> [ 0.000000] Linux version 4.19.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.13-1 (2018-12-30)
> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-1-amd64 root=UUID=8883f733-2248-47e0-90b9-ee5384f18d62 ro quiet
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
> [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
> [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x000000000a20a000-0x000000000affffff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x000000005d11afff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000005d11b000-0x000000005d20bfff] reserved
> [ 0.000000] BIOS-e820: [mem 0x000000005d20c000-0x000000005d389fff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000005d38a000-0x000000005d790fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x000000005d791000-0x000000005e5b9fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x000000005e5ba000-0x000000005e663fff] type 20
> [ 0.000000] BIOS-e820: [mem 0x000000005e664000-0x000000005effffff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000005f000000-0x00000000dfffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f33ffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] efi: EFI v2.70 by American Megatrends
> [ 0.000000] efi: ACPI 2.0=0x5d711000 ACPI=0x5d711000 SMBIOS=0x5e483000 MEMATTR=0x597ce018 ESRT=0x597d2f98
> [ 0.000000] secureboot: Secure boot could not be determined (mode 0)
> [ 0.000000] SMBIOS 2.8 present.
> [ 0.000000] DMI: Micro-Star International Co., Ltd. MS-7A37/B350M MORTAR (MS-7A37), BIOS 1.I0 11/06/2018
> [ 0.000000] tsc: Fast TSC calibration failed
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
Please find the Linux messages attached.


Kind regards,

Paul
[ 0.000000] Linux version 4.19.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.13-1 (2018-12-30)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-1-amd64 root=UUID=8883f733-2248-47e0-90b9-ee5384f18d62 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a20a000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x000000005d11afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005d11b000-0x000000005d20bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000005d20c000-0x000000005d389fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005d38a000-0x000000005d790fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005d791000-0x000000005e5b9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000005e5ba000-0x000000005e663fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000005e664000-0x000000005effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005f000000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f33ffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x5d711000 ACPI=0x5d711000 SMBIOS=0x5e483000 MEMATTR=0x597ce018 ESRT=0x597d2f98
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Micro-Star International Co., Ltd. MS-7A37/B350M MORTAR (MS-7A37), BIOS 1.I0 11/06/2018
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x41f340 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000420000000 aka 16896M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0x5f000 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x00000000597d2f98 to 0x00000000597d2fd0.
[ 0.000000] Base memory trampoline at [(____ptrval____)] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x144801000, 0x144801fff] PGTABLE
[ 0.000000] BRK [0x144802000, 0x144802fff] PGTABLE
[ 0.000000] BRK [0x144803000, 0x144803fff] PGTABLE
[ 0.000000] BRK [0x144804000, 0x144804fff] PGTABLE
[ 0.000000] BRK [0x144805000, 0x144805fff] PGTABLE
[ 0.000000] BRK [0x144806000, 0x144806fff] PGTABLE
[ 0.000000] BRK [0x144807000, 0x144807fff] PGTABLE
[ 0.000000] BRK [0x144808000, 0x144808fff] PGTABLE
[ 0.000000] BRK [0x144809000, 0x144809fff] PGTABLE
[ 0.000000] BRK [0x14480a000, 0x14480afff] PGTABLE
[ 0.000000] BRK [0x14480b000, 0x14480bfff] PGTABLE
[ 0.000000] BRK [0x14480c000, 0x14480cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37235000-0x37911fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000005D711000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000005D7110A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000005D718F58 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180810/tbfadt-624)
[ 0.000000] ACPI: DSDT 0x000000005D7111F0 007D67 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x000000005D77AD80 000040
[ 0.000000] ACPI: APIC 0x000000005D719070 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000005D719150 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000005D719198 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000005D719238 005419 (v02 AMD AmdTable 00000002 MSFT 02000002)
[ 0.000000] ACPI: SSDT 0x000000005D71E658 0007DC (v01 AMD AMD CPU 00000001 AMD 00000001)
[ 0.000000] ACPI: CRAT 0x000000005D71EE38 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001)
[ 0.000000] ACPI: CDIT 0x000000005D71F648 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000005D71F678 002DA8 (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.000000] ACPI: MCFG 0x000000005D722420 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000005D722460 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: UEFI 0x000000005D722498 000048 (v01 00000000 00000000)
[ 0.000000] ACPI: IVRS 0x000000005D7224E0 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
[ 0.000000] ACPI: BGRT 0x000000005D7225B0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000005D7225E8 000C33 (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000005D723220 0010F5 (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000005D724318 001B4E (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000005D725E68 0000BF (v01 AMD AMD PT 00001000 INTL 20120913)
[ 0.000000] ACPI: WSMT 0x000000005D725F28 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f33ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41f33b000-0x41f33ffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041f33ffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009d7ffff]
[ 0.000000] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.000000] node 0: [mem 0x000000000a20a000-0x000000000affffff]
[ 0.000000] node 0: [mem 0x000000000b020000-0x000000005d11afff]
[ 0.000000] node 0: [mem 0x000000005d20c000-0x000000005d389fff]
[ 0.000000] node 0: [mem 0x000000005e664000-0x000000005effffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f33ffff]
[ 0.000000] Reserved but unavailable: 97 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f33ffff]
[ 0.000000] On node 0 totalpages: 3656810
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 28 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 5927 pages used for memmap
[ 0.000000] DMA32 zone: 379275 pages, LIFO batch:63
[ 0.000000] Normal zone: 51149 pages used for memmap
[ 0.000000] Normal zone: 3273536 pages, LIFO batch:63
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0a200000-0x0a209fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5d11b000-0x5d20bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5d38a000-0x5d790fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5d791000-0x5e5b9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5e5ba000-0x5e663fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5f000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd0fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd100000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x93/0x537 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s143192 r8192 d28840 u262144
[ 0.000000] pcpu-alloc: s143192 r8192 d28840 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3599642
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-1-amd64 root=UUID=8883f733-2248-47e0-90b9-ee5384f18d62 ro quiet
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 14228932K/14627240K available (10252K kernel code, 1236K rwdata, 3196K rodata, 1572K init, 2332K bss, 398308K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] ftrace: allocating 31612 entries in 124 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.000000] NR_IRQS: 33024, nr_irqs: 1096, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180810
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] Switched APIC routing to physical flat.
[ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.036000] tsc: Unable to calibrate against PIT
[ 0.036000] tsc: using HPET reference calibration
[ 0.036000] tsc: Detected 3500.117 MHz processor
[ 0.000007] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3273bf77e15, max_idle_ns: 440795257978 ns
[ 0.000013] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.23 BogoMIPS (lpj=14000468)
[ 0.000015] pid_max: default: 32768 minimum: 301
[ 0.001324] Security Framework initialized
[ 0.001325] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.001396] AppArmor: AppArmor initialized
[ 0.005912] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.007125] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.007231] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.007268] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.007809] mce: CPU supports 23 MCE banks
[ 0.007826] LVT offset 1 assigned for vector 0xf9
[ 0.007873] LVT offset 2 assigned for vector 0xf4
[ 0.007883] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.007883] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[ 0.007885] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.007885] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.007891] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.007892] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.011474] Freeing SMP alternatives memory: 24K
[ 0.020008] smpboot: CPU0: AMD Ryzen 3 2200G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0)
[ 0.020008] Performance Events: Fam17h core perfctr, AMD PMU driver.
[ 0.020008] ... version: 0
[ 0.020008] ... bit width: 48
[ 0.020008] ... generic registers: 6
[ 0.020008] ... value mask: 0000ffffffffffff
[ 0.020008] ... max period: 00007fffffffffff
[ 0.020008] ... fixed-purpose events: 0
[ 0.020008] ... event mask: 000000000000003f
[ 0.020008] rcu: Hierarchical SRCU implementation.
[ 0.020008] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.020008] smp: Bringing up secondary CPUs ...
[ 0.020008] x86: Booting SMP configuration:
[ 0.020008] .... node #0, CPUs: #1 #2 #3
[ 0.026450] smp: Brought up 1 node, 4 CPUs
[ 0.026450] smpboot: Max logical packages: 4
[ 0.026450] smpboot: Total of 4 processors activated (28000.93 BogoMIPS)
[ 0.026450] devtmpfs: initialized
[ 0.026450] x86/mm: Memory block size: 128MB
[ 0.029213] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a209fff] (40960 bytes)
[ 0.029213] PM: Registering ACPI NVS region [mem 0x5d38a000-0x5d790fff] (4222976 bytes)
[ 0.029213] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.029213] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.029213] pinctrl core: initialized pinctrl subsystem
[ 0.029349] NET: Registered protocol family 16
[ 0.029436] audit: initializing netlink subsys (disabled)
[ 0.029441] audit: type=2000 audit(1546246410.064:1): state=initialized audit_enabled=0 res=1
[ 0.029441] cpuidle: using governor ladder
[ 0.029441] cpuidle: using governor menu
[ 0.029441] ACPI: bus type PCI registered
[ 0.029441] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.029441] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.029441] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.029441] PCI: Using configuration type 1 for base access
[ 0.032182] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.032182] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.032276] ACPI: Added _OSI(Module Device)
[ 0.032277] ACPI: Added _OSI(Processor Device)
[ 0.032278] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.032278] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.032279] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.032280] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.038593] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.040072] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.041242] ACPI: Interpreter enabled
[ 0.041254] ACPI: (supports S0 S3 S4 S5)
[ 0.041255] ACPI: Using IOAPIC for interrupt routing
[ 0.041542] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.041783] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.043600] ACPI: Power Resource [P0ST] (on)
[ 0.043625] ACPI: Power Resource [P3ST] (on)
[ 0.050794] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.050798] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.050924] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.051043] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.051052] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.051340] PCI host bridge to bus 0000:00
[ 0.051342] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.051344] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.051345] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.051354] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.051355] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.051356] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.051358] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[ 0.051359] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.051360] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.051369] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
[ 0.051493] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
[ 0.051653] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[ 0.052122] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
[ 0.052178] pci 0000:00:01.2: enabling Extended Tags
[ 0.052240] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.052393] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[ 0.052527] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
[ 0.052582] pci 0000:00:08.1: enabling Extended Tags
[ 0.052639] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.052749] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
[ 0.052803] pci 0000:00:08.2: enabling Extended Tags
[ 0.052857] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[ 0.052997] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.053181] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.053376] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
[ 0.053432] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
[ 0.053496] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
[ 0.053554] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
[ 0.053619] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
[ 0.053682] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
[ 0.053737] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
[ 0.053793] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
[ 0.053939] pci 0000:15:00.0: [1022:43bb] type 00 class 0x0c0330
[ 0.053970] pci 0000:15:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit]
[ 0.054021] pci 0000:15:00.0: enabling Extended Tags
[ 0.054080] pci 0000:15:00.0: PME# supported from D3hot D3cold
[ 0.054188] pci 0000:15:00.1: [1022:43b7] type 00 class 0x010601
[ 0.054253] pci 0000:15:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff]
[ 0.054263] pci 0000:15:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref]
[ 0.054271] pci 0000:15:00.1: enabling Extended Tags
[ 0.054320] pci 0000:15:00.1: PME# supported from D3hot D3cold
[ 0.054392] pci 0000:15:00.2: [1022:43b2] type 01 class 0x060400
[ 0.054446] pci 0000:15:00.2: enabling Extended Tags
[ 0.054498] pci 0000:15:00.2: PME# supported from D3hot D3cold
[ 0.054630] pci 0000:00:01.2: PCI bridge to [bus 15-1b]
[ 0.054636] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
[ 0.054639] pci 0000:00:01.2: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.054742] pci 0000:16:00.0: [1022:43b4] type 01 class 0x060400
[ 0.054801] pci 0000:16:00.0: enabling Extended Tags
[ 0.054864] pci 0000:16:00.0: PME# supported from D3hot D3cold
[ 0.054972] pci 0000:16:01.0: [1022:43b4] type 01 class 0x060400
[ 0.055031] pci 0000:16:01.0: enabling Extended Tags
[ 0.055093] pci 0000:16:01.0: PME# supported from D3hot D3cold
[ 0.055194] pci 0000:16:04.0: [1022:43b4] type 01 class 0x060400
[ 0.055252] pci 0000:16:04.0: enabling Extended Tags
[ 0.055313] pci 0000:16:04.0: PME# supported from D3hot D3cold
[ 0.055429] pci 0000:15:00.2: PCI bridge to [bus 16-1b]
[ 0.055435] pci 0000:15:00.2: bridge window [io 0xf000-0xffff]
[ 0.055438] pci 0000:15:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.055482] pci 0000:16:00.0: PCI bridge to [bus 17]
[ 0.055574] pci 0000:18:00.0: [10ec:8168] type 00 class 0x020000
[ 0.055622] pci 0000:18:00.0: reg 0x10: [io 0xf000-0xf0ff]
[ 0.055664] pci 0000:18:00.0: reg 0x18: [mem 0xfe704000-0xfe704fff 64bit]
[ 0.055690] pci 0000:18:00.0: reg 0x20: [mem 0xfe700000-0xfe703fff 64bit]
[ 0.055838] pci 0000:18:00.0: supports D1 D2
[ 0.055839] pci 0000:18:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.056062] pci 0000:16:01.0: PCI bridge to [bus 18]
[ 0.056068] pci 0000:16:01.0: bridge window [io 0xf000-0xffff]
[ 0.056072] pci 0000:16:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.056122] pci 0000:16:04.0: PCI bridge to [bus 1b]
[ 0.056263] pci 0000:38:00.0: [1002:15dd] type 00 class 0x030000
[ 0.056309] pci 0000:38:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.056327] pci 0000:38:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.056339] pci 0000:38:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.056351] pci 0000:38:00.0: reg 0x24: [mem 0xfe600000-0xfe67ffff]
[ 0.056372] pci 0000:38:00.0: enabling Extended Tags
[ 0.056383] pci 0000:38:00.0: BAR 0: assigned to efifb
[ 0.056478] pci 0000:38:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.056611] pci 0000:38:00.1: [1002:15de] type 00 class 0x040300
[ 0.056641] pci 0000:38:00.1: reg 0x10: [mem 0xfe688000-0xfe68bfff]
[ 0.056713] pci 0000:38:00.1: enabling Extended Tags
[ 0.056779] pci 0000:38:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.056851] pci 0000:38:00.2: [1022:15df] type 00 class 0x108000
[ 0.056901] pci 0000:38:00.2: reg 0x18: [mem 0xfe500000-0xfe5fffff]
[ 0.056933] pci 0000:38:00.2: reg 0x24: [mem 0xfe68c000-0xfe68dfff]
[ 0.056953] pci 0000:38:00.2: enabling Extended Tags
[ 0.057113] pci 0000:38:00.3: [1022:15e0] type 00 class 0x0c0330
[ 0.057148] pci 0000:38:00.3: reg 0x10: [mem 0xfe400000-0xfe4fffff 64bit]
[ 0.057209] pci 0000:38:00.3: enabling Extended Tags
[ 0.057283] pci 0000:38:00.3: PME# supported from D0 D3hot D3cold
[ 0.057368] pci 0000:38:00.4: [1022:15e1] type 00 class 0x0c0330
[ 0.057403] pci 0000:38:00.4: reg 0x10: [mem 0xfe300000-0xfe3fffff 64bit]
[ 0.057464] pci 0000:38:00.4: enabling Extended Tags
[ 0.057537] pci 0000:38:00.4: PME# supported from D0 D3hot D3cold
[ 0.057639] pci 0000:38:00.6: [1022:15e3] type 00 class 0x040300
[ 0.057668] pci 0000:38:00.6: reg 0x10: [mem 0xfe680000-0xfe687fff]
[ 0.057740] pci 0000:38:00.6: enabling Extended Tags
[ 0.057807] pci 0000:38:00.6: PME# supported from D0 D3hot D3cold
[ 0.057954] pci 0000:00:08.1: PCI bridge to [bus 38]
[ 0.057959] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.057962] pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe6fffff]
[ 0.057968] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.058045] pci 0000:39:00.0: [1022:7901] type 00 class 0x010601
[ 0.058128] pci 0000:39:00.0: reg 0x24: [mem 0xfe900000-0xfe9007ff]
[ 0.058148] pci 0000:39:00.0: enabling Extended Tags
[ 0.058222] pci 0000:39:00.0: PME# supported from D3hot D3cold
[ 0.058342] pci 0000:00:08.2: PCI bridge to [bus 39]
[ 0.058350] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.058802] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.058846] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.058882] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.058931] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.058973] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.059007] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.059041] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.059074] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.059464] pci 0000:38:00.0: vgaarb: setting as boot VGA device
[ 0.059464] pci 0000:38:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.059464] pci 0000:38:00.0: vgaarb: bridge control possible
[ 0.059464] vgaarb: loaded
[ 0.059464] pps_core: LinuxPPS API ver. 1 registered
[ 0.059464] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.059464] PTP clock support registered
[ 0.059464] EDAC MC: Ver: 3.0.0
[ 0.060077] Registered efivars operations
[ 0.076253] PCI: Using ACPI for IRQ routing
[ 0.082708] PCI: pci_cache_line_size set to 64 bytes
[ 0.082787] e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
[ 0.082788] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.082789] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.082789] e820: reserve RAM buffer [mem 0x5d11b000-0x5fffffff]
[ 0.082790] e820: reserve RAM buffer [mem 0x5d38a000-0x5fffffff]
[ 0.082790] e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff]
[ 0.082791] e820: reserve RAM buffer [mem 0x41f340000-0x41fffffff]
[ 0.082895] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.082895] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.084047] clocksource: Switched to clocksource tsc-early
[ 0.094342] VFS: Disk quotas dquot_6.6.0
[ 0.094382] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.094537] AppArmor: AppArmor Filesystem Enabled
[ 0.094563] pnp: PnP ACPI init
[ 0.094682] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.094687] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.094737] system 00:01: [mem 0x60000000-0xdfffffff window] has been reserved
[ 0.094739] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.094834] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.094962] system 00:03: [io 0x0a00-0x0a0f] has been reserved
[ 0.094963] system 00:03: [io 0x0a10-0x0a1f] has been reserved
[ 0.094964] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 0.094965] system 00:03: [io 0x0a40-0x0a4f] has been reserved
[ 0.094968] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.095216] pnp 00:04: [dma 0 disabled]
[ 0.095311] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.095504] pnp 00:05: [dma 0 disabled]
[ 0.095547] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.095694] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.095695] system 00:06: [io 0x040b] has been reserved
[ 0.095696] system 00:06: [io 0x04d6] has been reserved
[ 0.095697] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.095698] system 00:06: [io 0x0c14] has been reserved
[ 0.095699] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.095700] system 00:06: [io 0x0c52] has been reserved
[ 0.095701] system 00:06: [io 0x0c6c] has been reserved
[ 0.095702] system 00:06: [io 0x0c6f] has been reserved
[ 0.095703] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.095704] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.095705] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.095706] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.095707] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.095707] system 00:06: [io 0x0800-0x089f] has been reserved
[ 0.095716] system 00:06: [io 0x0b00-0x0b0f] has been reserved
[ 0.095717] system 00:06: [io 0x0b20-0x0b3f] has been reserved
[ 0.095718] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.095720] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.095721] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.095722] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.095723] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.095725] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.095726] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.095727] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.095728] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.095730] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.096046] pnp: PnP ACPI: found 7 devices
[ 0.102331] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.102397] pci 0000:16:00.0: PCI bridge to [bus 17]
[ 0.102411] pci 0000:16:01.0: PCI bridge to [bus 18]
[ 0.102413] pci 0000:16:01.0: bridge window [io 0xf000-0xffff]
[ 0.102418] pci 0000:16:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.102427] pci 0000:16:04.0: PCI bridge to [bus 1b]
[ 0.102439] pci 0000:15:00.2: PCI bridge to [bus 16-1b]
[ 0.102441] pci 0000:15:00.2: bridge window [io 0xf000-0xffff]
[ 0.102446] pci 0000:15:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.102454] pci 0000:00:01.2: PCI bridge to [bus 15-1b]
[ 0.102456] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
[ 0.102460] pci 0000:00:01.2: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.102469] pci 0000:00:08.1: PCI bridge to [bus 38]
[ 0.102471] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.102476] pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe6fffff]
[ 0.102479] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.102485] pci 0000:00:08.2: PCI bridge to [bus 39]
[ 0.102489] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.102499] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.102500] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.102501] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.102502] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.102503] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.102504] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.102505] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[ 0.102506] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[ 0.102507] pci_bus 0000:15: resource 0 [io 0xf000-0xffff]
[ 0.102508] pci_bus 0000:15: resource 1 [mem 0xfe700000-0xfe8fffff]
[ 0.102509] pci_bus 0000:16: resource 0 [io 0xf000-0xffff]
[ 0.102510] pci_bus 0000:16: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.102511] pci_bus 0000:18: resource 0 [io 0xf000-0xffff]
[ 0.102511] pci_bus 0000:18: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.102512] pci_bus 0000:38: resource 0 [io 0xe000-0xefff]
[ 0.102513] pci_bus 0000:38: resource 1 [mem 0xfe300000-0xfe6fffff]
[ 0.102514] pci_bus 0000:38: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.102515] pci_bus 0000:39: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.102700] NET: Registered protocol family 2
[ 0.102940] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.102973] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.103132] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.103244] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.103287] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.103320] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.103460] NET: Registered protocol family 1
[ 0.103641] pci 0000:38:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.103648] pci 0000:38:00.1: Linked as a consumer to 0000:38:00.0
[ 0.103910] PCI: CLS 64 bytes, default 64
[ 0.103945] Unpacking initramfs...
[ 0.180750] Freeing initrd memory: 7028K
[ 0.180835] AMD-Vi: Unable to write to IOMMU perf counter.
[ 0.180930] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.180931] pci 0000:00:00.2: PCI INT A: not connected
[ 0.181373] iommu: Adding device 0000:00:01.0 to group 0
[ 0.181568] iommu: Adding device 0000:00:01.2 to group 1
[ 0.181782] iommu: Adding device 0000:00:08.0 to group 2
[ 0.181974] iommu: Adding device 0000:00:08.1 to group 3
[ 0.182000] iommu: Adding device 0000:00:08.2 to group 2
[ 0.182206] iommu: Adding device 0000:00:14.0 to group 4
[ 0.182228] iommu: Adding device 0000:00:14.3 to group 4
[ 0.182434] iommu: Adding device 0000:00:18.0 to group 5
[ 0.182457] iommu: Adding device 0000:00:18.1 to group 5
[ 0.182478] iommu: Adding device 0000:00:18.2 to group 5
[ 0.182507] iommu: Adding device 0000:00:18.3 to group 5
[ 0.182529] iommu: Adding device 0000:00:18.4 to group 5
[ 0.182550] iommu: Adding device 0000:00:18.5 to group 5
[ 0.182572] iommu: Adding device 0000:00:18.6 to group 5
[ 0.182594] iommu: Adding device 0000:00:18.7 to group 5
[ 0.182821] iommu: Adding device 0000:15:00.0 to group 6
[ 0.182857] iommu: Adding device 0000:15:00.1 to group 6
[ 0.182902] iommu: Adding device 0000:15:00.2 to group 6
[ 0.182924] iommu: Adding device 0000:16:00.0 to group 6
[ 0.182946] iommu: Adding device 0000:16:01.0 to group 6
[ 0.182968] iommu: Adding device 0000:16:04.0 to group 6
[ 0.183011] iommu: Adding device 0000:18:00.0 to group 6
[ 0.183279] iommu: Adding device 0000:38:00.0 to group 7
[ 0.183357] iommu: Using direct mapping for device 0000:38:00.0
[ 0.183466] iommu: Adding device 0000:38:00.1 to group 8
[ 0.183509] iommu: Adding device 0000:38:00.2 to group 8
[ 0.183552] iommu: Adding device 0000:38:00.3 to group 8
[ 0.183594] iommu: Adding device 0000:38:00.4 to group 8
[ 0.183637] iommu: Adding device 0000:38:00.6 to group 8
[ 0.183660] iommu: Adding device 0000:39:00.0 to group 2
[ 0.183908] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.183909] AMD-Vi: Extended features (0x4f77ef22294ada):
[ 0.183909] PPR NX GT IA GA PC GA_vAPIC
[ 0.183912] AMD-Vi: Interrupt remapping enabled
[ 0.183912] AMD-Vi: virtual APIC enabled
[ 0.184131] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.184999] amd_uncore: AMD NB counters detected
[ 0.185002] amd_uncore: AMD LLC counters detected
[ 0.185856] Initialise system trusted keyrings
[ 0.185952] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.187548] zbud: loaded
[ 0.187772] pstore: using deflate compression
[ 0.284722] Key type asymmetric registered
[ 0.284723] Asymmetric key parser 'x509' registered
[ 0.284755] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.284818] io scheduler noop registered
[ 0.284818] io scheduler deadline registered
[ 0.284881] io scheduler cfq registered (default)
[ 0.284882] io scheduler mq-deadline registered
[ 0.286350] pcieport 0000:00:01.2: AER enabled with IRQ 26
[ 0.286371] pcieport 0000:00:01.2: Signaling PME with IRQ 26
[ 0.286395] pcieport 0000:00:08.1: Signaling PME with IRQ 27
[ 0.286418] pcieport 0000:00:08.2: Signaling PME with IRQ 28
[ 0.286449] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.286459] efifb: probing for efifb
[ 0.286470] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[ 0.286471] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.286471] efifb: scrolling: redraw
[ 0.286473] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.288307] Console: switching to colour frame buffer device 128x48
[ 0.290034] fb0: EFI VGA frame buffer device
[ 0.290060] Monitor-Mwait will be used to enter C-1 state
[ 0.290516] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.311424] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.311791] Linux agpgart interface v0.103
[ 0.312156] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.312607] i8042: PNP: No PS/2 controller found.
[ 0.312657] mousedev: PS/2 mouse device common for all mice
[ 0.312714] rtc_cmos 00:02: RTC can wake from S4
[ 0.312986] rtc_cmos 00:02: registered as rtc0
[ 0.312997] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.313063] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.313715] NET: Registered protocol family 10
[ 0.316404] Segment Routing with IPv6
[ 0.316431] mip6: Mobile IPv6
[ 0.316433] NET: Registered protocol family 17
[ 0.316436] mpls_gso: MPLS GSO support
[ 0.316834] microcode: CPU0: patch_level=0x0810100b
[ 0.316839] microcode: CPU1: patch_level=0x0810100b
[ 0.316850] microcode: CPU2: patch_level=0x0810100b
[ 0.316857] microcode: CPU3: patch_level=0x0810100b
[ 0.316895] microcode: Microcode Update Driver: v2.2.
[ 0.316917] sched_clock: Marking stable (352882252, -35991111)->(423799862, -106908721)
[ 0.317114] registered taskstats version 1
[ 0.317115] Loading compiled-in X.509 certificates
[ 0.338263] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[ 0.338291] zswap: loaded using pool lzo/zbud
[ 0.338437] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.339214] rtc_cmos 00:02: setting system clock to 2018-12-31 08:53:31 UTC (1546246411)
[ 0.566016] Freeing unused kernel image memory: 1572K
[ 0.584614] Write protecting the kernel read-only data: 16384k
[ 0.586111] Freeing unused kernel image memory: 2028K
[ 0.586291] Freeing unused kernel image memory: 900K
[ 0.593034] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.593040] Run /init as init process
[ 0.667253] SCSI subsystem initialized
[ 0.668418] ACPI: bus type USB registered
[ 0.668439] usbcore: registered new interface driver usbfs
[ 0.668444] usbcore: registered new interface driver hub
[ 0.668522] usbcore: registered new device driver usb
[ 0.672864] libata version 3.00 loaded.
[ 0.673924] xhci_hcd 0000:15:00.0: xHCI Host Controller
[ 0.673929] xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 1
[ 0.675101] ahci 0000:15:00.1: version 3.0
[ 0.675243] ahci 0000:15:00.1: SSS flag set, parallel bus scan disabled
[ 0.675292] ahci 0000:15:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[ 0.675294] ahci 0000:15:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.676899] scsi host0: ahci
[ 0.677511] scsi host1: ahci
[ 0.677765] scsi host2: ahci
[ 0.677917] scsi host3: ahci
[ 0.678089] scsi host4: ahci
[ 0.678227] scsi host5: ahci
[ 0.678369] scsi host6: ahci
[ 0.678713] scsi host7: ahci
[ 0.678794] ata1: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 36
[ 0.678796] ata2: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 36
[ 0.678797] ata3: DUMMY
[ 0.678797] ata4: DUMMY
[ 0.678799] ata5: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 36
[ 0.678801] ata6: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 36
[ 0.678801] ata7: DUMMY
[ 0.678802] ata8: DUMMY
[ 0.685652] cryptd: max_cpu_qlen set to 1000
[ 0.690985] ahci 0000:39:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.690988] ahci 0000:39:00.0: flags: 64bit ncq sntf ilck led clo only pmp fbs pio
[ 0.691317] scsi host8: ahci
[ 0.691389] ata9: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900100 irq 38
[ 0.696693] AVX2 version of gcm_enc/dec engaged.
[ 0.696693] AES CTR mode by8 optimization enabled
[ 0.729327] xhci_hcd 0000:15:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000048000410
[ 0.729535] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.729537] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.729538] usb usb1: Product: xHCI Host Controller
[ 0.729538] usb usb1: Manufacturer: Linux 4.19.0-1-amd64 xhci-hcd
[ 0.729539] usb usb1: SerialNumber: 0000:15:00.0
[ 0.729659] hub 1-0:1.0: USB hub found
[ 0.729675] hub 1-0:1.0: 10 ports detected
[ 0.730163] xhci_hcd 0000:15:00.0: xHCI Host Controller
[ 0.730166] xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 2
[ 0.730168] xhci_hcd 0000:15:00.0: Host supports USB 3.10 Enhanced SuperSpeed
[ 0.730206] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.730219] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 0.730220] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.730221] usb usb2: Product: xHCI Host Controller
[ 0.730222] usb usb2: Manufacturer: Linux 4.19.0-1-amd64 xhci-hcd
[ 0.730222] usb usb2: SerialNumber: 0000:15:00.0
[ 0.730353] hub 2-0:1.0: USB hub found
[ 0.730362] hub 2-0:1.0: 4 ports detected
[ 0.730617] xhci_hcd 0000:38:00.3: xHCI Host Controller
[ 0.730620] xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 3
[ 0.730832] xhci_hcd 0000:38:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410
[ 0.731203] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.731204] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.731205] usb usb3: Product: xHCI Host Controller
[ 0.731205] usb usb3: Manufacturer: Linux 4.19.0-1-amd64 xhci-hcd
[ 0.731206] usb usb3: SerialNumber: 0000:38:00.3
[ 0.731331] hub 3-0:1.0: USB hub found
[ 0.731357] hub 3-0:1.0: 4 ports detected
[ 0.731663] xhci_hcd 0000:38:00.3: xHCI Host Controller
[ 0.731666] xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 4
[ 0.731668] xhci_hcd 0000:38:00.3: Host supports USB 3.10 Enhanced SuperSpeed
[ 0.731719] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.731740] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 0.731741] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.731742] usb usb4: Product: xHCI Host Controller
[ 0.731742] usb usb4: Manufacturer: Linux 4.19.0-1-amd64 xhci-hcd
[ 0.731743] usb usb4: SerialNumber: 0000:38:00.3
[ 0.731833] hub 4-0:1.0: USB hub found
[ 0.731849] hub 4-0:1.0: 4 ports detected
[ 0.732259] xhci_hcd 0000:38:00.4: xHCI Host Controller
[ 0.732262] xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 5
[ 0.732434] xhci_hcd 0000:38:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410
[ 0.732904] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.732905] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.732906] usb usb5: Product: xHCI Host Controller
[ 0.732907] usb usb5: Manufacturer: Linux 4.19.0-1-amd64 xhci-hcd
[ 0.732908] usb usb5: SerialNumber: 0000:38:00.4
[ 0.733436] hub 5-0:1.0: USB hub found
[ 0.733450] hub 5-0:1.0: 1 port detected
[ 0.733572] xhci_hcd 0000:38:00.4: xHCI Host Controller
[ 0.733574] xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 6
[ 0.733577] xhci_hcd 0000:38:00.4: Host supports USB 3.10 Enhanced SuperSpeed
[ 0.733613] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.733635] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 0.733636] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.733637] usb usb6: Product: xHCI Host Controller
[ 0.733638] usb usb6: Manufacturer: Linux 4.19.0-1-amd64 xhci-hcd
[ 0.733639] usb usb6: SerialNumber: 0000:38:00.4
[ 0.733742] hub 6-0:1.0: USB hub found
[ 0.733753] hub 6-0:1.0: 1 port detected
[ 0.992594] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.061265] usb 1-7: new low-speed USB device number 2 using xhci_hcd
[ 1.065229] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 1.168390] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.169310] ata9.00: supports DRM functions and may not be fully accessible
[ 1.169356] ata9.00: ATA-10: CT1000MX500SSD4, M3CR020, max UDMA/133
[ 1.169358] ata9.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.170095] ata9.00: supports DRM functions and may not be fully accessible
[ 1.170708] ata9.00: configured for UDMA/133
[ 1.208052] tsc: Refined TSC clocksource calibration: 3503.012 MHz
[ 1.208059] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x327e6e33414, max_idle_ns: 440795312059 ns
[ 1.208087] clocksource: Switched to clocksource tsc
[ 1.227658] usb 3-3: New USB device found, idVendor=1c6b, idProduct=a223, bcdDevice= 0.00
[ 1.227660] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.227661] usb 3-3: Product: Mass Storage Device
[ 1.227662] usb 3-3: Manufacturer: USB2.0 External
[ 1.227663] usb 3-3: SerialNumber: 86 406817504398
[ 1.304264] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.310742] usb 1-7: New USB device found, idVendor=093a, idProduct=2521, bcdDevice= 1.00
[ 1.310746] usb 1-7: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.310748] usb 1-7: Product: USB OPTICAL MOUSE
[ 1.327728] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.342509] usbcore: registered new interface driver usbhid
[ 1.342509] usbhid: USB HID core driver
[ 1.343719] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-7/1-7:1.0/0003:093A:2521.0001/input/input0
[ 1.343782] hid-generic 0003:093A:2521.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:15:00.0-7/input0
[ 1.448469] usb 1-10: new low-speed USB device number 3 using xhci_hcd
[ 1.617911] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.709716] usb 1-10: New USB device found, idVendor=045e, idProduct=07b9, bcdDevice= 1.14
[ 1.709720] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.709722] usb 1-10: Product: USB Keyboard
[ 1.709724] usb 1-10: Manufacturer: LITEON Technology
[ 1.739526] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-10/1-10:1.0/0003:045E:07B9.0002/input/input1
[ 1.796658] hid-generic 0003:045E:07B9.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:15:00.0-10/input0
[ 1.931055] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.931476] scsi 8:0:0:0: Direct-Access ATA CT1000MX500SSD4 020 PQ: 0 ANSI: 5
[ 1.933989] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.933990] sd 8:0:0:0: [sda] 4096-byte physical blocks
[ 1.933994] sd 8:0:0:0: [sda] Write Protect is off
[ 1.933996] sd 8:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.934000] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.935136] sda: sda1 sda2 sda3
[ 1.935630] sd 8:0:0:0: [sda] supports TCG Opal
[ 1.935631] sd 8:0:0:0: [sda] Attached SCSI disk
[ 1.982840] device-mapper: uevent: version 1.0.3
[ 1.982941] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 15.423444] random: cryptsetup: uninitialized urandom read (2 bytes read)
[ 15.430279] random: cryptsetup: uninitialized urandom read (2 bytes read)
[ 15.616276] random: cryptsetup: uninitialized urandom read (2 bytes read)
[ 15.741538] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 15.743762] random: fast init done
[ 15.770493] random: crng init done
[ 15.858665] systemd[1]: Inserted module 'autofs4'
[ 15.912728] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 15.932061] systemd[1]: Detected architecture x86-64.
[ 15.936700] systemd[1]: Set hostname to <tokeiihto>.
[ 16.024280] systemd[1]: Listening on Journal Socket (/dev/log).
[ 16.024359] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 16.025285] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 16.025597] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 16.025675] systemd[1]: Listening on udev Kernel Socket.
[ 16.025732] systemd[1]: Reached target Remote File Systems.
[ 16.028000] systemd[1]: Listening on Process Core Dump Socket.
[ 16.048063] lp: driver loaded but no devices found
[ 16.048622] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 16.050249] ppdev: user-space parallel port driver
[ 16.051686] parport_pc 00:04: reported by Plug and Play ACPI
[ 16.051859] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 16.137120] acpi_cpufreq: overriding BIOS provided _PSD data
[ 16.141811] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 16.141864] ACPI: Power Button [PWRB]
[ 16.141917] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 16.141988] ACPI: Power Button [PWRF]
[ 16.143772] systemd-journald[304]: Received request to flush runtime journal from PID 1
[ 16.152298] lp0: using parport0 (interrupt-driven).
[ 16.230337] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 16.230338] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 16.230551] sd 8:0:0:0: Attached scsi generic sg0 type 0
[ 16.232225] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 16.232281] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 16.232291] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[ 16.232495] libphy: r8169: probed
[ 16.232824] r8169 0000:18:00.0 eth0: RTL8168h/8111h, 30:9c:23:04:d6:98, XID 54100800, IRQ 52
[ 16.232826] r8169 0000:18:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 16.235515] usb-storage 3-3:1.0: USB Mass Storage device detected
[ 16.235618] scsi host9: usb-storage 3-3:1.0
[ 16.235764] usbcore: registered new interface driver usb-storage
[ 16.239166] snd_hda_intel 0000:38:00.1: Handle vga_switcheroo audio client
[ 16.245822] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 16.246688] EFI Variables Facility v0.08 2004-May-17
[ 16.264555] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input5
[ 16.264754] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input6
[ 16.264789] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input7
[ 16.273675] pstore: Registered efi as persistent store backend
[ 16.285658] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 16.285660] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.285661] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 16.285668] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 16.285668] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 16.285669] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 16.285670] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 16.285671] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 16.285672] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 16.352537] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input8
[ 16.352584] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input9
[ 16.352617] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input10
[ 16.352655] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input11
[ 16.352698] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input12
[ 16.352742] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input13
[ 16.352777] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input14
[ 16.354914] [drm] amdgpu kernel modesetting enabled.
[ 16.370417] kvm: disabled by bios
[ 16.373437] MCE: In-kernel MCE decoding enabled.
[ 16.374936] EDAC amd64: Node 0: DRAM ECC disabled.
[ 16.374938] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 16.375505] Parsing CRAT table with 1 nodes
[ 16.375509] Creating topology SYSFS entries
[ 16.375537] Topology: Add APU node [0x0:0x0]
[ 16.375538] Finished initializing topology
[ 16.375568] kfd kfd: Initialized module
[ 16.376079] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 16.376081] fb: switching to amdgpudrmfb from EFI VGA
[ 16.376097] Console: switching to colour dummy device 80x25
[ 16.376324] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1002:0x15DD 0xC8).
[ 16.376336] [drm] register mmio base: 0xFE600000
[ 16.376337] [drm] register mmio size: 524288
[ 16.376351] [drm] add ip block number 0 <soc15_common>
[ 16.376351] [drm] add ip block number 1 <gmc_v9_0>
[ 16.376352] [drm] add ip block number 2 <vega10_ih>
[ 16.376353] [drm] add ip block number 3 <psp>
[ 16.376353] [drm] add ip block number 4 <powerplay>
[ 16.376354] [drm] add ip block number 5 <dm>
[ 16.376355] [drm] add ip block number 6 <gfx_v9_0>
[ 16.376356] [drm] add ip block number 7 <sdma_v4_0>
[ 16.376356] [drm] add ip block number 8 <vcn_v1_0>
[ 16.376966] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_gpu_info.bin
[ 16.376995] [drm] VCN decode is enabled in VM mode
[ 16.376995] [drm] VCN encode is enabled in VM mode
[ 16.376996] [drm] VCN jpeg decode is enabled in VM mode
[ 16.380461] r8169 0000:18:00.0 enp24s0: renamed from eth0
[ 16.402826] [drm] BIOS signature incorrect 0 0
[ 16.402862] ATOM BIOS: 113-RAVEN-107
[ 16.402909] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 16.402929] amdgpu 0000:38:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[ 16.402930] amdgpu 0000:38:00.0: GART: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF
[ 16.402934] [drm] Detected VRAM RAM=2048M, BAR=2048M
[ 16.402934] [drm] RAM width 128bits DDR4
[ 16.412259] [TTM] Zone kernel: Available graphics memory: 7186208 kiB
[ 16.412260] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 16.412261] [TTM] Initializing pool allocator
[ 16.412264] [TTM] Initializing DMA pool allocator
[ 16.412330] [drm] amdgpu: 2048M of VRAM memory ready
[ 16.412331] [drm] amdgpu: 3072M of GTT memory ready.
[ 16.412351] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 16.412543] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[ 16.414164] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_asd.bin
[ 16.414681] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_pfp.bin
[ 16.414998] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_me.bin
[ 16.415210] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_ce.bin
[ 16.415636] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_rlc.bin
[ 16.420576] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_mec.bin
[ 16.423533] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_mec2.bin
[ 16.427321] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_sdma.bin
[ 16.427325] [drm] use_doorbell being set to: [true]
[ 16.429491] amdgpu 0000:38:00.0: firmware: direct-loading firmware amdgpu/raven_vcn.bin
[ 16.429496] [drm] Found VCN firmware Version: 1.73 Family ID: 18
[ 16.429506] [drm] PSP loading VCN firmware
[ 16.434836] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 16.452632] EDAC amd64: Node 0: DRAM ECC disabled.
[ 16.452633] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 16.495921] audit: type=1400 audit(1546246427.648:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=436 comm="apparmor_parser"
[ 16.498190] audit: type=1400 audit(1546246427.652:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=437 comm="apparmor_parser"
[ 16.499994] audit: type=1400 audit(1546246427.652:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=438 comm="apparmor_parser"
[ 16.501236] audit: type=1400 audit(1546246427.656:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=433 comm="apparmor_parser"
[ 16.501238] audit: type=1400 audit(1546246427.656:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=433 comm="apparmor_parser"
[ 16.501240] audit: type=1400 audit(1546246427.656:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=433 comm="apparmor_parser"
[ 16.508625] audit: type=1400 audit(1546246427.656:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=440 comm="apparmor_parser"
[ 16.508629] audit: type=1400 audit(1546246427.656:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=440 comm="apparmor_parser"
[ 16.508632] audit: type=1400 audit(1546246427.656:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=440 comm="apparmor_parser"
[ 16.508634] audit: type=1400 audit(1546246427.660:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=441 comm="apparmor_parser"
[ 16.644300] amdgpu: [powerplay] dpm has been enabled
[ 16.644380] [drm] DM_PPLIB: values for Invalid clock
[ 16.644381] [drm] DM_PPLIB: 0 in kHz
[ 16.644382] [drm] DM_PPLIB: 400000 in kHz
[ 16.644382] [drm] DM_PPLIB: 933000 in kHz
[ 16.644383] [drm] DM_PPLIB: 1067000 in kHz
[ 16.644514] WARNING: CPU: 3 PID: 319 at drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:1372 dcn_bw_update_from_pplib+0x16b/0x280 [amdgpu]
[ 16.644515] Modules linked in: nls_ascii nls_cp437 vfat fat edac_mce_amd amdkfd wmi_bmof ccp rng_core kvm irqbypass crct10dif_pclmul amdgpu(+) crc32_pclmul snd_hda_codec_realtek ghash_clmulni_intel snd_hda_codec_generic efi_pstore chash snd_hda_codec_hdmi gpu_sched efivars pcspkr ttm snd_hda_intel drm_kms_helper usb_storage snd_hda_codec sp5100_tco i2c_piix4 sg k10temp snd_hda_core snd_hwdep drm snd_pcm snd_timer r8169 i2c_algo_bit snd soundcore libphy wmi video button pcc_cpufreq acpi_cpufreq parport_pc ppdev lp parport efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb dm_crypt dm_mod sd_mod evdev hid_generic usbhid hid crc32c_intel aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ahci libahci xhci_pci xhci_hcd libata usbcore scsi_mod usb_common gpio_amdpt
[ 16.644569] gpio_generic
[ 16.644573] CPU: 3 PID: 319 Comm: (worker) Not tainted 4.19.0-1-amd64 #1 Debian 4.19.13-1
[ 16.644575] Hardware name: Micro-Star International Co., Ltd. MS-7A37/B350M MORTAR (MS-7A37), BIOS 1.I0 11/06/2018
[ 16.644679] RIP: 0010:dcn_bw_update_from_pplib+0x16b/0x280 [amdgpu]
[ 16.644681] Code: d8 ca d8 f1 d9 5a 50 8b 44 fc 14 49 8b 94 24 78 01 00 00 48 89 04 24 df 2c 24 d8 f1 db 42 78 de c9 de ca de f9 d9 5a 4c eb 02 <0f> 0b 48 89 da be 04 00 00 00 48 89 ef e8 83 55 fe ff 84 c0 0f 84
[ 16.644683] RSP: 0018:ffffbd1b41eab790 EFLAGS: 00010246
[ 16.644685] RAX: 0000000000000001 RBX: ffffbd1b41eab7f0 RCX: 0000000000000000
[ 16.644686] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff933510ad66a0
[ 16.644688] RBP: ffff933506f81100 R08: 0000000000000388 R09: 0000000000000004
[ 16.644689] R10: 0000000000000000 R11: 0000000000000001 R12: ffff933505b47000
[ 16.644690] R13: ffff93350b4ea700 R14: ffff933505b47000 R15: 0000000000000000
[ 16.644692] FS: 00007f295bbbb8c0(0000) GS:ffff933510ac0000(0000) knlGS:0000000000000000
[ 16.644693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 16.644695] CR2: 00007f0e05959ffa CR3: 000000040acfc000 CR4: 00000000003406e0
[ 16.644696] Call Trace:
[ 16.644705] ? _cond_resched+0x15/0x30
[ 16.644810] dcn10_create_resource_pool+0x781/0x9d0 [amdgpu]
[ 16.644913] ? dal_aux_engine_dce110_create+0x39/0x70 [amdgpu]
[ 16.645011] dc_create_resource_pool+0x42/0x180 [amdgpu]
[ 16.645015] ? _cond_resched+0x15/0x30
[ 16.645018] ? __kmalloc+0x177/0x210
[ 16.645119] ? dal_gpio_service_create+0x8f/0x110 [amdgpu]
[ 16.645216] dc_create+0x20f/0x620 [amdgpu]
[ 16.645319] dm_hw_init+0xc8/0x130 [amdgpu]
[ 16.645416] amdgpu_device_init.cold.28+0x10ea/0x1295 [amdgpu]
[ 16.645499] amdgpu_driver_load_kms+0x86/0x2c0 [amdgpu]
[ 16.645519] drm_dev_register+0x109/0x140 [drm]
[ 16.645601] amdgpu_pci_probe+0x1ad/0x230 [amdgpu]
[ 16.645606] local_pci_probe+0x41/0x90
[ 16.645609] pci_device_probe+0x189/0x1a0
[ 16.645613] really_probe+0x235/0x3a0
[ 16.645615] driver_probe_device+0xb3/0xf0
[ 16.645617] __driver_attach+0xdd/0x110
[ 16.645619] ? driver_probe_device+0xf0/0xf0
[ 16.645622] bus_for_each_dev+0x76/0xc0
[ 16.645625] ? klist_add_tail+0x3b/0x70
[ 16.645628] bus_add_driver+0x152/0x230
[ 16.645630] ? 0xffffffffc0d38000
[ 16.645632] driver_register+0x6b/0xb0
[ 16.645634] ? 0xffffffffc0d38000
[ 16.645637] do_one_initcall+0x46/0x1c3
[ 16.645640] ? _cond_resched+0x15/0x30
[ 16.645642] ? kmem_cache_alloc_trace+0x155/0x1d0
[ 16.645646] do_init_module+0x5a/0x210
[ 16.645649] load_module+0x215c/0x2380
[ 16.645654] ? __do_sys_finit_module+0xad/0x110
[ 16.645656] __do_sys_finit_module+0xad/0x110
[ 16.645660] do_syscall_64+0x53/0x100
[ 16.645664] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 16.645666] RIP: 0033:0x7f295c624319
[ 16.645668] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 47 6b 0c 00 f7 d8 64 89 01 48
[ 16.645669] RSP: 002b:00007ffcf8dcb198 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 16.645672] RAX: ffffffffffffffda RBX: 0000558bd1384890 RCX: 00007f295c624319
[ 16.645673] RDX: 0000000000000000 RSI: 00007f295c528cad RDI: 0000000000000014
[ 16.645674] RBP: 00007f295c528cad R08: 0000000000000000 R09: 0000000000000000
[ 16.645675] R10: 0000000000000014 R11: 0000000000000246 R12: 0000000000000000
[ 16.645676] R13: 0000558bd1369c90 R14: 0000000000020000 R15: 0000558bd1384890
[ 16.645679] ---[ end trace 557abfb30409cf4c ]---
[ 16.645682] [drm] DM_PPLIB: values for Invalid clock
[ 16.645682] [drm] DM_PPLIB: 300000 in kHz
[ 16.645683] [drm] DM_PPLIB: 600000 in kHz
[ 16.645684] [drm] DM_PPLIB: 626000 in kHz
[ 16.645684] [drm] DM_PPLIB: 654000 in kHz
[ 16.660987] [drm] Display Core initialized with v3.1.59!
[ 16.675087] [drm] SADs count is: -2, don't need to read it
[ 16.675503] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 16.675504] [drm] Driver supports precise vblank timestamp query.
[ 16.701204] [drm] VCN decode and encode initialized successfully.
[ 16.702242] kfd kfd: Allocated 3969056 bytes on gart
[ 16.702258] Topology: Add APU node [0x15dd:0x1002]
[ 16.702424] kfd kfd: added device 1002:15dd
[ 16.704083] [drm] fb mappable at 0x61100000
[ 16.704084] [drm] vram apper at 0x60000000
[ 16.704085] [drm] size 5242880
[ 16.704086] [drm] fb depth is 24
[ 16.704086] [drm] pitch is 5120
[ 16.704163] fbcon: amdgpudrmfb (fb0) is primary device
[ 16.750456] Console: switching to colour frame buffer device 160x64
[ 16.769017] amdgpu 0000:38:00.0: fb0: amdgpudrmfb frame buffer device
[ 16.788164] amdgpu 0000:38:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
[ 16.788168] amdgpu 0000:38:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
[ 16.788170] amdgpu 0000:38:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
[ 16.788172] amdgpu 0000:38:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
[ 16.788173] amdgpu 0000:38:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
[ 16.788175] amdgpu 0000:38:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
[ 16.788177] amdgpu 0000:38:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
[ 16.788178] amdgpu 0000:38:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
[ 16.788180] amdgpu 0000:38:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
[ 16.788182] amdgpu 0000:38:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
[ 16.788184] amdgpu 0000:38:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
[ 16.788186] amdgpu 0000:38:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
[ 16.788187] amdgpu 0000:38:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
[ 16.788189] amdgpu 0000:38:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
[ 16.788191] amdgpu 0000:38:00.0: ring 14(vcn_jpeg) uses VM inv eng 8 on hub 1
[ 16.791568] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:38:00.0 on minor 0
[ 16.946767] IPv6: ADDRCONF(NETDEV_UP): enp24s0: link is not ready
[ 16.946970] r8169 0000:18:00.0: firmware: failed to load rtl_nic/rtl8168h-2.fw (-2)
[ 16.947006] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 16.947044] r8169 0000:18:00.0: Direct firmware load for rtl_nic/rtl8168h-2.fw failed with error -2
[ 16.947047] r8169 0000:18:00.0 enp24s0: unable to load firmware patch rtl_nic/rtl8168h-2.fw (-2)
[ 16.947278] Generic PHY r8169-1800:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-1800:00, irq=IGNORE)
[ 17.046744] IPv6: ADDRCONF(NETDEV_UP): enp24s0: link is not ready
[ 17.249513] scsi 9:0:0:0: CD-ROM ASUS SDRW-08U9M-U B101 PQ: 0 ANSI: 0
[ 17.249741] scsi 9:0:0:0: Attached scsi generic sg1 type 5
[ 17.266108] sr 9:0:0:0: Power-on or device reset occurred
[ 17.277664] sr 9:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 17.277668] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 17.278094] sr 9:0:0:0: Attached scsi CD-ROM sr0
[ 20.718082] r8169 0000:18:00.0 enp24s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 20.718091] IPv6: ADDRCONF(NETDEV_CHANGE): enp24s0: link becomes ready
[ 310.040081] PM: suspend entry (deep)
[ 310.040083] PM: Syncing filesystems ... done.
[ 310.042240] Freezing user space processes ... (elapsed 0.030 seconds) done.
[ 310.072751] OOM killer disabled.
[ 310.072752] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 310.073878] Suspending console(s) (use no_console_suspend to debug)
[ 310.074833] serial 00:05: disabled
[ 310.074999] parport_pc 00:04: disabled
[ 310.121235] sd 8:0:0:0: [sda] Synchronizing SCSI cache
[ 310.121297] sd 8:0:0:0: [sda] Stopping disk
[ 310.264816] ACPI: Preparing to enter system sleep state S3
[ 310.601066] PM: Saving platform NVS memory
[ 310.601137] Disabling non-boot CPUs ...
[ 310.617964] smpboot: CPU 1 is now offline
[ 310.633854] smpboot: CPU 2 is now offline
[ 310.650099] smpboot: CPU 3 is now offline
[ 310.652654] ACPI: Low-level resume complete
[ 310.652704] PM: Restoring platform NVS memory
[ 310.759774] Enabling non-boot CPUs ...
[ 310.759806] x86: Booting SMP configuration:
[ 310.759806] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 310.762244] cache: parent cpu1 should not be sleeping
[ 310.762340] microcode: CPU1: patch_level=0x0810100b
[ 310.762444] CPU1 is up
[ 310.762453] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 310.765096] cache: parent cpu2 should not be sleeping
[ 310.765188] microcode: CPU2: patch_level=0x0810100b
[ 310.765284] CPU2 is up
[ 310.765292] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 310.767736] cache: parent cpu3 should not be sleeping
[ 310.767839] microcode: CPU3: patch_level=0x0810100b
[ 310.767945] CPU3 is up
[ 310.768286] ACPI: Waking up from system sleep state S3
[ 310.848395] usb usb1: root hub lost power or was reset
[ 310.848399] usb usb2: root hub lost power or was reset
[ 310.850101] parport_pc 00:04: activated
[ 310.850457] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[ 310.850501] [drm] PSP is resuming...
[ 310.850643] serial 00:05: activated
[ 310.859056] sd 8:0:0:0: [sda] Starting disk
[ 311.060607] amdgpu: [powerplay] dpm has been enabled
[ 311.077052] [drm] SADs count is: -2, don't need to read it
[ 311.161399] ata5: SATA link down (SStatus 0 SControl 300)
[ 311.161931] ata6: SATA link down (SStatus 0 SControl 300)
[ 311.162972] ata2: SATA link down (SStatus 0 SControl 300)
[ 311.164519] ata1: SATA link down (SStatus 0 SControl 300)
[ 311.165507] [drm] VCN decode and encode initialized successfully.
[ 311.165531] amdgpu 0000:38:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
[ 311.165532] amdgpu 0000:38:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
[ 311.165533] amdgpu 0000:38:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
[ 311.165533] amdgpu 0000:38:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
[ 311.165534] amdgpu 0000:38:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
[ 311.165535] amdgpu 0000:38:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
[ 311.165536] amdgpu 0000:38:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
[ 311.165537] amdgpu 0000:38:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
[ 311.165538] amdgpu 0000:38:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
[ 311.165539] amdgpu 0000:38:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
[ 311.165540] amdgpu 0000:38:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
[ 311.165541] amdgpu 0000:38:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
[ 311.165542] amdgpu 0000:38:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
[ 311.165543] amdgpu 0000:38:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
[ 311.165544] amdgpu 0000:38:00.0: ring 14(vcn_jpeg) uses VM inv eng 8 on hub 1
[ 311.335165] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 311.336082] ata9.00: supports DRM functions and may not be fully accessible
[ 311.337070] ata9.00: supports DRM functions and may not be fully accessible
[ 311.337770] ata9.00: configured for UDMA/133
[ 311.395629] usb 1-10: reset low-speed USB device number 3 using xhci_hcd
[ 312.031001] usb 1-7: reset low-speed USB device number 2 using xhci_hcd
[ 312.433371] acpi LNXPOWER:01: Turning OFF
[ 312.433407] OOM killer enabled.
[ 312.433408] Restarting tasks ... done.
[ 312.434377] PM: suspend exit
[ 312.511787] IPv6: ADDRCONF(NETDEV_UP): enp24s0: link is not ready
[ 312.512778] Generic PHY r8169-1800:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-1800:00, irq=IGNORE)
[ 312.612523] IPv6: ADDRCONF(NETDEV_UP): enp24s0: link is not ready
[ 316.243747] r8169 0000:18:00.0 enp24s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 316.243759] IPv6: ADDRCONF(NETDEV_CHANGE): enp24s0: link becomes ready
[ 322.158012] fuse init (API version 7.27)
[ 1119.431324] TCP: enp24s0: Driver has suspect GRO implementation, TCP performance may be compromised.
\
 
 \ /
  Last update: 2018-12-31 11:03    [W:0.126 / U:4.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site