lkml.org 
[lkml]   [2018]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/6] drm/v3d: Document cache flushing ABI.
> + * The caches (L1T, slice, and L2T) will be flushed before the job
> + * executes. The TLB writes are guaranteed to have been flushed by

I would say before *each* job executes, as the caches are flushed
before both bin and render.
I wouldn't say "the caches" as not all of the V3D caches are flushed
before executing a control list. In particular, the VCD cache is not
cleared by the kernel driver (not even sure if there is a register
interface to do this); it is expected that the control list will do
this itself (using the CLEAR_VCD_CACHE instruction).
On 3.3 and earlier there is a separate L2C for instructions/uniforms
and a GCA. These do need to be flushed, and it looks like they are, so
they should be mentioned here.

\
 
 \ /
  Last update: 2018-12-03 18:23    [W:0.108 / U:7.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site