lkml.org 
[lkml]   [2018]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/7] microblaze: adjust the help to the real behavior
Date
"make ARCH=microblaze help" mentions simpleImage.<dt>.unstrip,
but it never works because Makefile assumes "system.unstrip" is
the name of DT.

$ make ARCH=microblaze CROSS_COMPILE=microblaze-linux- simpleImage.system.unstrip
[ snip ]
make[1]: *** No rule to make target 'arch/microblaze/boot/dts/system.unstrip.dtb', needed by 'arch/microblaze/boot/dts/system.dtb'. Stop.
make: *** [Makefile;1060: arch/microblaze/boot/dts] Error 2
make: *** Waiting for unfinished jobs....

Rip off the never-working target.

In my understanding, simpleImage.<dt> works like a phony target that
generates multiple images. Reflect the behavior to the help message.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

arch/microblaze/Makefile | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 0823d29..97e1384 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -89,9 +89,7 @@ define archhelp
echo '* linux.bin - Create raw binary'
echo ' linux.bin.gz - Create compressed raw binary'
echo ' linux.bin.ub - Create U-Boot wrapped raw binary'
- echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
- echo ' - stripped elf with fdt blob'
- echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob'
+ echo ' simpleImage.<dt> - Create images with $(arch)/boot/dts/<dt>.dts linked in'
echo ' *_defconfig - Select default config from arch/microblaze/configs'
echo ''
echo ' Targets with <dt> embed a device tree blob inside the image'
--
2.7.4
\
 
 \ /
  Last update: 2018-12-03 08:52    [W:0.220 / U:1.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site