lkml.org 
[lkml]   [2018]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: rcu_preempt caused oom
Date
Thanks, we have run the test for the whole weekend and not reproduce the issue,  so we confirm the CONFIG_RCU_BOOST can fix the issue.

We have enabled the rcupdate.rcu_cpu_stall_timeout=7 and also set panic on rcu stall and will see if we can see the panic, will keep you posed with the test results.
echo 1 > /proc/sys/kernel/panic_on_rcu_stall

-----Original Message-----
From: Paul E. McKenney <paulmck@linux.ibm.com>
Sent: Saturday, December 1, 2018 12:49 AM
To: He, Bo <bo.he@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>; linux-kernel@vger.kernel.org; josh@joshtriplett.org; mathieu.desnoyers@efficios.com; jiangshanlai@gmail.com; Zhang, Jun <jun.zhang@intel.com>; Xiao, Jin <jin.xiao@intel.com>; Zhang, Yanmin <yanmin.zhang@intel.com>
Subject: Re: rcu_preempt caused oom

On Fri, Nov 30, 2018 at 03:18:58PM +0000, He, Bo wrote:
> Here is the kernel cmdline:

Thank you!

> Kernel command line: androidboot.acpio_idx=0
> androidboot.bootloader=efiwrapper-02_03-userdebug_kernelflinger-06_03-
> userdebug androidboot.diskbus=00.0 androidboot.verifiedbootstate=green
> androidboot.bootreason=power-on androidboot.serialno=R1J56L6006a7bb
> g_ffs.iSerialNumber=R1J56L6006a7bb no_timer_check noxsaves
> reboot_panic=p,w i915.hpd_sense_invert=0x7 mem=2G nokaslr nopti
> ftrace_dump_on_oops trace_buf_size=1024K intel_iommu=off gpt
> loglevel=4 androidboot.hardware=gordon_peak
> firmware_class.path=/vendor/firmware relative_sleep_states=1
> enforcing=0 androidboot.selinux=permissive cpu_init_udelay=10
> androidboot.android_dt_dir=/sys/bus/platform/devices/ANDR0001:00/prope
> rties/android/ pstore.backend=ramoops memmap=0x1400000$0x50000000
> ramoops.mem_address=0x50000000 ramoops.mem_size=0x1400000
> ramoops.record_size=0x4000 ramoops.console_size=0x1000000
> ramoops.ftrace_size=0x10000 ramoops.dump_oops=1 vga=current
> i915.modeset=1 drm.atomic=1 i915.nuclear_pageflip=1
> drm.vblankoffdelay=

And no sign of any suppression of RCU CPU stall warnings. Hmmm...
It does take more than 21 seconds to OOM? Or do things happen faster than that? If they do happen faster than that, then on approach would be to add something like this to the kernel command line:

rcupdate.rcu_cpu_stall_timeout=7

This would set the stall timeout to seven seconds. Note that timeouts less than three seconds are silently interpreted as three seconds.

Thanx, Paul

> -----Original Message-----
> From: Steven Rostedt <rostedt@goodmis.org>
> Sent: Friday, November 30, 2018 11:17 PM
> To: Paul E. McKenney <paulmck@linux.ibm.com>
> Cc: He, Bo <bo.he@intel.com>; linux-kernel@vger.kernel.org;
> josh@joshtriplett.org; mathieu.desnoyers@efficios.com;
> jiangshanlai@gmail.com; Zhang, Jun <jun.zhang@intel.com>; Xiao, Jin
> <jin.xiao@intel.com>; Zhang, Yanmin <yanmin.zhang@intel.com>
> Subject: Re: rcu_preempt caused oom
>
> On Fri, 30 Nov 2018 06:43:17 -0800
> "Paul E. McKenney" <paulmck@linux.ibm.com> wrote:
>
> > Could you please send me your list of kernel boot parameters? They
> > usually appear near the start of your console output.
>
> Or just: cat /proc/cmdline
>
> -- Steve
>

\
 
 \ /
  Last update: 2018-12-03 08:46    [W:0.074 / U:9.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site