lkml.org 
[lkml]   [2018]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: iio: accel: use a generic node name for lis302
Date
The example should follow the practice or using a generic node name
instead of the precise programming model, as recommended by the DTSpec.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
Documentation/devicetree/bindings/iio/accel/lis302.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/accel/lis302.txt b/Documentation/devicetree/bindings/iio/accel/lis302.txt
index dfdce67826ba..764e28ec1a0a 100644
--- a/Documentation/devicetree/bindings/iio/accel/lis302.txt
+++ b/Documentation/devicetree/bindings/iio/accel/lis302.txt
@@ -64,7 +64,7 @@ Optional properties for all bus drivers:

Example for a SPI device node:

- lis302@0 {
+ accelerometer@0 {
compatible = "st,lis302dl-spi";
reg = <0>;
spi-max-frequency = <1000000>;
@@ -89,7 +89,7 @@ Example for a SPI device node:

Example for a I2C device node:

- lis331dlh: lis331dlh@18 {
+ lis331dlh: accelerometer@18 {
compatible = "st,lis331dlh", "st,lis3lv02d";
reg = <0x18>;
Vdd-supply = <&lis3_reg>;
--
2.19.1
\
 
 \ /
  Last update: 2018-12-03 12:49    [W:0.053 / U:15.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site