lkml.org 
[lkml]   [2018]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/8] arm64: dts: add i2c nodes for MT2712
Date
Signed-off-by: YT Shen <yt.shen@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 90 +++++++++++++++++++++++++++++++
1 file changed, 90 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index d429770..7bac8b6 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -418,6 +418,96 @@
status = "disabled";
};

+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt2712-i2c";
+ reg = <0 0x11007000 0 0x90>,
+ <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <4>;
+ clocks = <&pericfg CLK_PERI_I2C0>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main",
+ "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt2712-i2c";
+ reg = <0 0x11008000 0 0x90>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <4>;
+ clocks = <&pericfg CLK_PERI_I2C1>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main",
+ "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt2712-i2c";
+ reg = <0 0x11009000 0 0x90>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <4>;
+ clocks = <&pericfg CLK_PERI_I2C2>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main",
+ "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@11010000 {
+ compatible = "mediatek,mt2712-i2c";
+ reg = <0 0x11010000 0 0x90>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <4>;
+ clocks = <&pericfg CLK_PERI_I2C3>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main",
+ "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@11011000 {
+ compatible = "mediatek,mt2712-i2c";
+ reg = <0 0x11011000 0 0x90>,
+ <0 0x11000380 0 0x80>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <4>;
+ clocks = <&pericfg CLK_PERI_I2C4>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main",
+ "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@11013000 {
+ compatible = "mediatek,mt2712-i2c";
+ reg = <0 0x11013000 0 0x90>,
+ <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <4>;
+ clocks = <&pericfg CLK_PERI_I2C5>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main",
+ "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart4: serial@11019000 {
compatible = "mediatek,mt2712-uart",
"mediatek,mt6577-uart";
--
1.9.1
\
 
 \ /
  Last update: 2018-12-03 12:37    [W:0.069 / U:2.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site