lkml.org 
[lkml]   [2018]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] PCI: Mark NXP LS1088 to avoid bus reset bus
Date
Hi Alex,

> -----Original Message-----
> From: Alex Williamson <alex.williamson@redhat.com>
> Sent: Friday, November 30, 2018 9:49 PM
> To: Bharat Bhushan <bharat.bhushan@nxp.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>; Bjorn Helgaas
> <helgaas@kernel.org>; linux-pci@vger.kernel.org; Linux Kernel Mailing List
> <linux-kernel@vger.kernel.org>; bharatb.yadav@gmail.com; David Daney
> <david.daney@cavium.com>; jglauber@cavium.com;
> mbroemme@libmpq.org; chrisrblake93@gmail.com
> Subject: Re: [PATCH] PCI: Mark NXP LS1088 to avoid bus reset bus
>
> On Fri, 30 Nov 2018 06:24:16 +0000
> Bharat Bhushan <bharat.bhushan@nxp.com> wrote:
>
> > Hi Alex,
> >
> > > -----Original Message-----
> > > From: Alex Williamson <alex.williamson@redhat.com>
> > > Sent: Friday, November 30, 2018 11:26 AM
> > > To: Bharat Bhushan <bharat.bhushan@nxp.com>
> > > Cc: Bjorn Helgaas <bhelgaas@google.com>; Bjorn Helgaas
> > > <helgaas@kernel.org>; linux-pci@vger.kernel.org; Linux Kernel
> > > Mailing List <linux-kernel@vger.kernel.org>;
> > > bharatb.yadav@gmail.com; David Daney <david.daney@cavium.com>;
> > > jglauber@cavium.com; mbroemme@libmpq.org;
> chrisrblake93@gmail.com
> > > Subject: Re: [PATCH] PCI: Mark NXP LS1088 to avoid bus reset bus
> > >
> > > On Fri, 30 Nov 2018 05:29:47 +0000
> > > Bharat Bhushan <bharat.bhushan@nxp.com> wrote:
> > >
> > > > Hi,
> > > >
> > > > > -----Original Message-----
> > > > > From: Bjorn Helgaas <bhelgaas@google.com>
> > > > > Sent: Thursday, November 29, 2018 1:46 AM
> > > > > To: Bharat Bhushan <bharat.bhushan@nxp.com>
> > > > > Cc: alex.williamson@redhat.com; Bjorn Helgaas
> > > > > <helgaas@kernel.org>;
> > > > > linux- pci@vger.kernel.org; Linux Kernel Mailing List <linux-
> > > > > kernel@vger.kernel.org>; bharatb.yadav@gmail.com; David Daney
> > > > > <david.daney@cavium.com>; jglauber@cavium.com;
> > > mbroemme@libmpq.org;
> > > > > chrisrblake93@gmail.com
> > > > > Subject: Re: [PATCH] PCI: Mark NXP LS1088 to avoid bus reset bus
> > > > >
> > > > > On Tue, Nov 27, 2018 at 10:32 PM Bharat Bhushan
> > > > > <bharat.bhushan@nxp.com> wrote:
> > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: Alex Williamson <alex.williamson@redhat.com>
> > > > > > > Sent: Tuesday, November 27, 2018 9:39 PM
> > > > > > > To: Bjorn Helgaas <helgaas@kernel.org>
> > > > > > > Cc: Bharat Bhushan <bharat.bhushan@nxp.com>;
> > > > > > > linux-pci@vger.kernel.org; linux-kernel@vger.kernel.org;
> > > > > > > bharatb.yadav@gmail.com; David Daney
> > > <david.daney@cavium.com>;
> > > > > Jan
> > > > > > > Glauber <jglauber@cavium.com>; Maik Broemme
> > > > > <mbroemme@libmpq.org>;
> > > > > > > Chris Blake <chrisrblake93@gmail.com>
> > > > > > > Subject: Re: [PATCH] PCI: Mark NXP LS1088 to avoid bus reset
> > > > > > > bus
> > > > > > >
> > > > > > > On Tue, 27 Nov 2018 09:33:56 -0600 Bjorn Helgaas
> > > > > > > <helgaas@kernel.org> wrote:
> > > > >
> > > > > > > > 4) Is there a hardware erratum for this? If so, please
> > > > > > > > include the URL here.
> > > > > >
> > > > > > No h/w errata as of now.
> > > > >
> > > > > Does that mean (a) the HW folks agree this is a hardware problem
> > > > > but they haven't written an erratum, (b) there is an erratum but
> > > > > it isn't public, (c) we don't have any concrete evidence of a
> > > > > hardware problem, but things just don't work if we do a bus
> > > > > reset, (d) something
> > > else?
> > > >
> > > > I will say it is (c) - not concluded to be hardware h/w issue.
> > > >
> > > > >
> > > > > > In pci_reset_secondary_bus() I have tried to increase the
> > > > > > delay after reset
> > > > > but not helped.
> > > > > > Do I need to add delay at some other place as well?
> > > > >
> > > > > No, I think the place you tried should be enough.
> > > > >
> > > > > You should also be able to exercise this from user-space by
> > > > > using "setpci" to set and clear the Secondary Bus Reset bit in
> > > > > the Bridge Control register. Then you can also use setpci to
> > > > > read/write config space of the NIC. The kernel would normally
> > > > > read the Vendor and Device IDs as the first access to the device
> during enumeration.
> > > > > You also might be able to learn something by using "lspci -vv"
> > > > > on the bridge before and after the reset to see if it logs any
> > > > > AER bits (if it
> > > supports AER) or the other standard error logging bits.
> > > >
> > > > I tried below sequence for Secondary bus reset and device config
> > > > space show 0xff
> > > >
> > > > root@localhost:~# lspci -x
> > > > 0002:00:00.0 PCI bridge: Freescale Semiconductor Inc Device 80c0
> > > > (rev
> > > > 10)
> > > > 00: 57 19 c0 80 07 01 10 00 10 00 04 06 08 00 01 00
> > > > 10: 00 00 00 00 00 00 00 00 00 01 ff 00 01 01 00 00
> > > > 20: 00 40 00 40 f1 ff 01 00 00 00 00 00 00 00 00 00
> > > > 30: 00 00 00 00 40 00 00 00 00 00 00 40 63 01 00 00
> > > >
> > > > 0002:01:00.0 Ethernet controller: Intel Corporation 82574L Gigabit
> > > > Network Connection
> > > > 00: 86 80 d3 10 06 04 10 00 00 00 00 02 10 00 00 00
> > > > 10: 00 00 0c 40 00 00 00 40 01 00 00 00 00 00 0e 40
> > > > 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 1f a0
> > > > 30: 00 00 24 40 c8 00 00 00 00 00 00 00 63 01 00 00
> > > >
> > > > root@localhost:~# setpci -s 0002:00:00.0 0x3e.b=0x40
> > > > root@localhost:~# setpci -s 0002:00:00.0 0x3e.b=0x00
> > > >
> > > > root@localhost:~# lspci -x
> > > > 0002:00:00.0 PCI bridge: Freescale Semiconductor Inc Device 80c0
> > > > (rev
> > > > 10)
> > > > 00: 57 19 c0 80 07 01 10 00 10 00 04 06 08 00 01 00
> > > > 10: 00 00 00 00 00 00 00 00 00 01 ff 00 01 01 00 00
> > > > 20: 00 40 00 40 f1 ff 01 00 00 00 00 00 00 00 00 00
> > > > 30: 00 00 00 00 40 00 00 00 00 00 00 40 63 01 00 00
> > >
> > > Just for curiosity sake, what if you re-write the secondary and
> > > subordinate bus registers here:
> > >
> > > # setpci -s 0002:00:00.0 0x19.b=0x01 # setpci -s 0002:00:00.0
> > > 0x1a.b=0xff
> >
> > Result is same, here are logs
> >
> > root@localhost:~# setpci -s 0002:00:00.0 0x3e.b=0x40 root@localhost:~#
> > setpci -s 0002:00:00.0 0x3e.b=0x00 root@localhost:~# setpci -s
> > 0002:00:00.0 0x19.b=0x01 root@localhost:~# setpci -s 0002:00:00.0
> > 0x1a.b=0xff root@localhost:~# lspci -x
> > 0002:00:00.0 PCI bridge: Freescale Semiconductor Inc Device 80c0 (rev
> > 10)
> > 00: 57 19 c0 80 07 01 10 00 10 00 04 06 08 00 01 00
> > 10: 00 00 00 00 00 00 00 00 00 01 ff 00 01 01 00 00
> > 20: 00 40 00 40 f1 ff 01 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 40 00 00 00 00 00 00 40 63 01 00 00
> >
> > 0002:01:00.0 Ethernet controller: Intel Corporation 82574L Gigabit
> > Network Connection (rev ff)
> > 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> > 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> > 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> > 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>
> Ok, thanks for scratching my itch.
>
> > > IIRC the users that debugged the AMD bus reset issue re-wrote the
> > > entire 64 bytes of the bridge config header and then further
> > > narrowed the issue down to the two registers above. If one bridge
> > > implementation can have such an issue, maybe others do too. Perhaps
> there's common IP in use.
> >
> > > Are you able
> > > to test other endpoints besides this e1000e device with this setpci
> > > technique? Thanks,
> >
> > I tried with " Broadcom Limited NetXtreme BCM5722 Gigabit Ethernet PCI
> Express" I observe same issue.
>
> Personally I'd exhaust talking with your hardware folks before blocking bus
> resets at the software level, it seems like a gap in PCIe compliance of the
> device. Thanks,

I will continue to work with our h/w team on this.

Thanks
-Bharat

>
> Alex

\
 
 \ /
  Last update: 2018-12-03 12:03    [W:0.052 / U:3.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site