lkml.org 
[lkml]   [2018]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] irqchip/meson-gpio: Add support for Meson-G12A SoC
From
Date
On 03/12/2018 10:28, Xingyu Chen wrote:
>
>
> On 2018/12/3 17:19, Jerome Brunet wrote:
>> On Mon, 2018-12-03 at 14:13 +0800, Xingyu Chen wrote:
>>> The Meson-G12A SoC uses the same GPIO interrupt controller IP block as the
>>> other Meson SoCs, A totle of 100 pins can be spied on, which is the sum of:
>>>
>>> - 223:100 undefined (no interrupt)
>>> - 99:97   3 pins on bank GPIOE
>>> - 96:77   20 pins on bank GPIOX
>>> - 76:61   16 pins on bank GPIOA
>>> - 60:53   8 pins on bank GPIOC
>>> - 52:37   16 pins on bank BOOT
>>> - 36:28   9 pins on bank GPIOH
>>> - 27:12   16 pins on bank GPIOZ
>>> - 11:0    12 pins in the AO domain
>>>
>>> Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
>>> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
>>> ---
>>>   drivers/irqchip/irq-meson-gpio.c | 5 +++++
>>>   1 file changed, 5 insertions(+)
>>>
>>> diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-
>>> gpio.c
>>> index 7b531fd075b8..971e8dea069a 100644
>>> --- a/drivers/irqchip/irq-meson-gpio.c
>>> +++ b/drivers/irqchip/irq-meson-gpio.c
>>> @@ -67,12 +67,17 @@ static const struct meson_gpio_irq_params axg_params = {
>>>       .nr_hwirq = 100,
>>>   };
>>>   +static const struct meson_gpio_irq_params g12a_params = {
>>> +    .nr_hwirq = 100,
>>> +};
>>> +
>>
>> Same comment as on i2c, the g12 seems compatible with the axg.
>> Is this patchset patchset really necessary ?
>>
> Although the total number of pins is the same as the Meson-AXG SoC, the gpio banks and irq numbers are different. To avoid confusion on use, i think the new compatible string is needed.

OK for the new compatible, but you can re-use the same struct like for i2c.

Neil

>>>   static const struct of_device_id meson_irq_gpio_matches[] = {
>>>       { .compatible = "amlogic,meson8-gpio-intc", .data = &meson8_params },
>>>       { .compatible = "amlogic,meson8b-gpio-intc", .data = &meson8b_params
>>> },
>>>       { .compatible = "amlogic,meson-gxbb-gpio-intc", .data = &gxbb_params
>>> },
>>>       { .compatible = "amlogic,meson-gxl-gpio-intc", .data = &gxl_params },
>>>       { .compatible = "amlogic,meson-axg-gpio-intc", .data = &axg_params },
>>> +    { .compatible = "amlogic,meson-g12a-gpio-intc", .data = &g12a_params
>>> },
>>>       { }
>>>   };
>>>  
>>
>>
>> .
>>
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic

\
 
 \ /
  Last update: 2018-12-03 11:07    [W:0.053 / U:1.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site