lkml.org 
[lkml]   [2018]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 0/2] SPI-NOR add NPCM FIU controller driver
On Mon,  3 Dec 2018 11:14:54 +0200
Tomer Maimon <tmaimon77@gmail.com> wrote:

> This patch set adds Flash Interface Unit(FIU) SPI-NOR
> support for the Nuvoton NPCM Baseboard Management
> Controller (BMC).
>
> The FIU supports single, dual or quad communication interface.
>
> the FIU controller can operate in following modes:
> - User Mode Access(UMA): provides flash access by using an
> indirect address/data mechanism.
> - direct rd/wr mode: maps the flash memory into the core
> address space.
> - SPI-X mode: used for an expansion bus to an ASIC or CPLD.
>
> The NPCM750/730/715/710 supports up to three FIU devices:
> - FIU0 supports two chip select.
> - FIU3 supports four chip select.
> - FIUX supports two chip select.
>
> The NPCM FIU driver tested on NPCM750 evaluation board.
>
> Tomer Maimon (2):
> dt-binding: mtd: add NPCM FIU controller
> mtd: spi-nor: add NPCM FIU controller driver
>
> Documentation/devicetree/bindings/mtd/npcm-fiu.txt | 64 ++
> drivers/mtd/spi-nor/Kconfig | 8 +
> drivers/mtd/spi-nor/Makefile | 1 +
> drivers/mtd/spi-nor/npcm-fiu.c | 930 +++++++++++++++++++++

We are currently trying to move all SPI NOR controller drivers out of
drivers/mtd/spi-nor. Can you try to implement the spi-mem interface [1]
and place your driver in drivers/spi/.

[1]https://elixir.bootlin.com/linux/v4.20-rc5/source/include/linux/spi/spi-mem.h#L185

\
 
 \ /
  Last update: 2018-12-03 10:23    [W:0.087 / U:35.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site