lkml.org 
[lkml]   [2018]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 01/12] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
From
Date
Hi,

On 2018/12/3 16:35, Sergei Shtylyov wrote:
> Hello!
>
> On 03.12.2018 6:45, Yu Chen wrote:
>
>> This patch adds binding descriptions to support the dwc3 controller
>> on HiSilicon SoCs and boards like the HiKey960.
>>
>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: John Stultz <john.stultz@linaro.org>
>> Signed-off-by: Yu Chen <chenyu56@huawei.com>
>> ---
>>   .../devicetree/bindings/usb/dwc3-hisi.txt          | 67 ++++++++++++++++++++++
>>   1 file changed, 67 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/usb/dwc3-hisi.txt
>>
>> diff --git a/Documentation/devicetree/bindings/usb/dwc3-hisi.txt b/Documentation/devicetree/bindings/usb/dwc3-hisi.txt
>> new file mode 100644
>> index 000000000000..d32d2299a0a1
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/dwc3-hisi.txt
>> @@ -0,0 +1,67 @@
>> +HiSilicon DWC3 USB SoC controller
>> +
>> +This file documents the parameters for the dwc3-hisi driver.
>> +
>> +Required properties:
>> +- compatible:    should be "hisilicon,hi3660-dwc3"
>> +- clocks:    A list of phandle + clock-specifier pairs for the
>> +        clocks listed in clock-names
>> +- clock-names:    Specify clock names
>> +- resets:    list of phandle and reset specifier pairs.
>> +
>> +Sub-nodes:
>> +The dwc3 core should be added as subnode to HiSilicon DWC3 as shown in the
>> +example below. The DT binding details of dwc3 can be found in:
>> +Documentation/devicetree/bindings/usb/dwc3.txt
>> +
>> +Example:
>> +    usb3: hisi_dwc3 {
>> +        compatible = "hisilicon,hi3660-dwc3";
>> +        #address-cells = <2>;
>> +        #size-cells = <2>;
>> +        ranges;
>> +
>> +        clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
>> +             <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
>> +        clock-names = "clk_usb3phy_ref", "aclk_usb3otg";
>> +        assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
>> +        assigned-clock-rates = <229000000>;
>> +        resets = <&crg_rst 0x90 8>,
>> +             <&crg_rst 0x90 7>,
>> +             <&crg_rst 0x90 6>,
>> +             <&crg_rst 0x90 5>;
>> +
>> +        dwc3: dwc3@ff100000 {
>
>     According to the DT spec, the node names should be generic, not chip specific, i.e. usb@ff100000 in this case.
>

Do you mean it should be usb@ff100000: dwc3@ff100000 ?

Thanks!

> [...]
>
> MBR, Sergei
>
> .
>

\
 
 \ /
  Last update: 2018-12-03 09:52    [W:0.086 / U:7.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site