lkml.org 
[lkml]   [2018]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] igb: Fix an issue that PME is not enabled during runtime suspend
Date
I210 ethernet card doesn't wakeup when a cable gets plugged. It's
because its PME is not set.

Since commit 42eca2302146 ("PCI: Don't touch card regs after runtime
suspend D3"), if the PCI state is saved, pci_pm_runtime_suspend() stops
calling pci_finish_runtime_suspend(), which enables the PCI PME.

To fix the issue, let's not to save PCI states when it's runtime
suspend, to let the PCI subsytem enables PME.

Fixes: 42eca2302146 ("PCI: Don't touch card regs after runtime suspend D3")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
drivers/net/ethernet/intel/igb/igb_main.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 5df88ad8ac81..93f150784cfc 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -8770,9 +8770,11 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
rtnl_unlock();

#ifdef CONFIG_PM
- retval = pci_save_state(pdev);
- if (retval)
- return retval;
+ if (!runtime) {
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+ }
#endif

status = rd32(E1000_STATUS);
--
2.17.1
\
 
 \ /
  Last update: 2018-12-03 06:55    [W:0.052 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site