[lkml]   [2018]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/3] qcom: spmi: add support for hierarchical IRQ chip
This patch series adds hierarchical IRQ chip support to spmi-gpio so
that device tree consumers can request an IRQ directly from the GPIO
block rather than having to request an IRQ from the underlying PMIC.
The first patch in this series converts pmic-arb to use the version 2
IRQ interface and patches 2 and 3 add support for the hierarchical
IRQ chip to spmi-gpio.

For more background information, see the email thread with Linus
Walleij's excellent description of the problem at

The patches need to be applied in the order that I have them in order
to allow for a proper bisection, however part of the series can be
applied without any breakage. Maybe the spmi-arb change can go in
for v4.21 and the spmi-gpio changes can go in for v4.22?

This work was tested on a LG Nexus 5 (hammerhead) phone. My status page
at describes what is working
so far with an upstream kernel.

Brian Masney (3):
spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical
IRQ chips
qcom: spmi-gpio: add support for hierarchical IRQ chip
ARM: dts: qcom: msm8974: add interrupt properties

arch/arm/boot/dts/qcom-pm8941.dtsi | 3 +
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 119 ++++++++++++++++++++++-
drivers/spmi/spmi-pmic-arb.c | 91 ++++++++++++-----
3 files changed, 182 insertions(+), 31 deletions(-)


 \ /
  Last update: 2018-12-29 12:49    [W:0.084 / U:0.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site