lkml.org 
[lkml]   [2018]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 4/4] Bluetooth: btqca: inject command complete event during fw download
Hi Marcel,

On 2018-12-29 12:48, Marcel Holtmann wrote:
> Hi Balakrishna,
>
>> Latest qualcomm chips are not sending an command complete event for
>> every firmware packet sent to chip. They only respond with a vendor
>> specific event for the last firmware packet. This optimization will
>> decrease the BT ON time. Due to this we are seeing a timeout error
>> message logs on the console during firmware download. Now we are
>> injecting a command complete event once we receive an vendor specific
>> event for the last RAM firmware packet.
>>
>> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
>> ---
>> drivers/bluetooth/btqca.c | 39 ++++++++++++++++++++++++++++++++++++++-
>> drivers/bluetooth/btqca.h | 3 +++
>> 2 files changed, 41 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> index ec9e03a6b778..0b533f65f652 100644
>> --- a/drivers/bluetooth/btqca.c
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -144,6 +144,7 @@ static void qca_tlv_check_data(struct rome_config
>> *config,
>> * In case VSE is skipped, only the last segment is acked.
>> */
>> config->dnld_mode = tlv_patch->download_mode;
>> + config->dnld_type = config->dnld_mode;
>>
>> BT_DBG("Total Length : %d bytes",
>> le32_to_cpu(tlv_patch->total_size));
>> @@ -264,6 +265,31 @@ static int qca_tlv_send_segment(struct hci_dev
>> *hdev, int seg_size,
>> return err;
>> }
>>
>> +static int qca_inject_cmd_complete_event(struct hci_dev *hdev)
>> +{
>> + struct hci_event_hdr *hdr;
>> + struct hci_ev_cmd_complete *evt;
>> + struct sk_buff *skb;
>> +
>> + skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL);
>> + if (!skb)
>> + return -ENOMEM;
>> +
>> + hdr = skb_put(skb, sizeof(*hdr));
>> + hdr->evt = HCI_EV_CMD_COMPLETE;
>> + hdr->plen = sizeof(*evt) + 1;
>> +
>> + evt = skb_put(skb, sizeof(*evt));
>> + evt->ncmd = 1;
>> + evt->opcode = HCI_OP_NOP;
>> +
>> + skb_put_u8(skb, QCA_HCI_CC_SUCCESS);
>> +
>> + hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
>> +
>> + return hci_recv_frame(hdev, skb);
>> +}
>> +
>> static int qca_download_firmware(struct hci_dev *hdev,
>> struct rome_config *config)
>> {
>> @@ -297,11 +323,22 @@ static int qca_download_firmware(struct hci_dev
>> *hdev,
>> ret = qca_tlv_send_segment(hdev, segsize, segment,
>> config->dnld_mode);
>> if (ret)
>> - break;
>> + goto out;
>>
>> segment += segsize;
>> }
>>
>> + /* Latest qualcomm chipsets are not sending a command complete event
>> + * for every fw packet sent. They only respond with a vendor
>> specific
>> + * event for the last packet. This optimization in the chip will
>> + * decrease the BT in initialization time. Here we will inject a
>> command
>> + * complete event to avoid a command timeout error message.
>> + */
>> + if ((config->dnld_type == ROME_SKIP_EVT_VSE_CC ||
>> + config->dnld_type == ROME_SKIP_EVT_VSE))
>> + return qca_inject_cmd_complete_event(hdev);
>> +
>
> have you actually considered using __hci_cmd_send in that case. It is
> allowed for vendor OGF to use that command. I see you actually do use
> it and now I am failing to understand what this is for.
>
[Bala]: thanks for reviewing the change.

__hci_cmd_send() can be used only to send the command to the chip. it
will not wait for the response for the command sent.

as you know that every vendor command sent to chip will respond with
vendor specific event and command complete event.
but in our case chip will only respond with vendor specific event only.
so we are injecting command complete event.

> Regards
>
> Marcel

--
Regards
Balakrishna.

\
 
 \ /
  Last update: 2018-12-29 08:46    [W:2.610 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site