[lkml]   [2018]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/5] drm/bridge: various small lvds-encoder things

I'm not sure if I should have added the texas chips to the lvds_encoder_match
list in the driver, right next to the thine,thc63lvdm83d entry, but ended
up not doing that. That can always be added later, if needed...

Changes since v2:
- changed from pwdn-gpios to powerdown-gpios after discussion with Rob with
new patch 3/5 updating the thine,thc63lvdm83d binding as well as a
- added patch 4/5 which helps keep lines shorter in the lvds-encoder driver
- added tag from Rob on patch 2/5

Changes since v1:
- fork out the bindings for the texas chips into their own file in order
to avoid clutter in the generic lvds-transmitter binding.
- added a patch to remove some surplus stuff in the generic lvds-transmitter


Peter Rosin (5):
dt-bindings: display: bridge: fork out ti,ds90c185 from
dt-bindings: display: bridge: lvds-transmitter: cleanup example
dt-bindings: display: bridge: thc63lvdm83d: use standard
drm/bridge: lvds-encoder: add dev helper variable in .probe()
drm/bridge: lvds-encoder: add powerdown-gpios support

.../bindings/display/bridge/lvds-transmitter.txt | 10 +---
.../bindings/display/bridge/thine,thc63lvdm83d.txt | 2 +-
.../bindings/display/bridge/ti,ds90c185.txt | 55 ++++++++++++++++++++++
drivers/gpu/drm/bridge/lvds-encoder.c | 53 +++++++++++++++++----
4 files changed, 100 insertions(+), 20 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt


 \ /
  Last update: 2018-12-29 08:08    [W:0.078 / U:0.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site