lkml.org 
[lkml]   [2018]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 00/25] Re-use nvram module
On Sun, 30 Dec 2018, I wrote:

>
> I'm not opposed to exported functions in place of a singleton ops
> struct. Other things being equal I'm inclined toward the ops struct,
> perhaps because I like encapsulation or perhaps because I don't like
> excess generality. (That design decision was made years ago and I don't
> remember the reasoning.)

The rationale for the ops struct was that it offers introspection.

It turns out that PPC64 device drivers don't care about byte-at-a-time
accessors and X86 device drivers don't care about checksum validation.
But that only gets us so far.

We still needed a way to find out whether the arch has provided
byte-at-a-time accessors (i.e. PPC32 and M68K Mac) or byte range accessors
(i.e. PPC64 and those platforms with checksummed NVRAM like X86 and M68K
Atari).

You can't resolve this question at build time for a multi-platform kernel
binary, so pre-processor tricks don't help.

Device drivers tend to want to access NVRAM one byte at a time. With this
patch series, those platforms which need checksum validation always set
byte-at-a-time methods to NULL. (Hence the atari_scsi changes in patch 3.)

The char misc driver is quite different to the usual device drivers,
because the struct file_operations methods always access a byte range.

The NULL methods in the ops struct allow the nvram.c misc device to avoid
inefficient byte-at-a-time accessors where possible, just as
arch/powerpc/kernel/nvram_64.c presently does.

--

\
 
 \ /
  Last update: 2018-12-30 05:06    [W:0.056 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site