lkml.org 
[lkml]   [2018]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: How to force RC to forward p2p TLPs
[+cc Logan, Stephen, Jonathan, Eric, Alex]

On Sat, Dec 22, 2018 at 12:50:19PM +0800, yu wrote:
> Hi all,
>
> We have a PCIE card which has a PEX8732 switch on-board, and there
> are two endpoint SOCs like graphic decoder behind the switch, and by
> default the ACS is enabled in 8732.
>
> We use the p2p DMA to transfer data between these two endpoint SOCs,
> and if the host server is not enable ACS in BIOS, the p2p works well,
> but when ACS is enabled in BIOS, the p2p is always failed. With the
> help of a protocol analyzer, we can see that the TLP is redirected to
> RC, and RC just discard it.
>
> I tried to find how to make RC forward redirected TLP to its original
> target, but nothing found, it seems this is highly related to the RC
> vendors.
>
> In the PCIE 4.0 spec, the section of the RC behavior of the p2p
> request redirect said that ''implementation-specific logic within the
> RC that determines whether the request is directed towards its
> original target, or blocked as an ACS Violation error. the algorithms
> and specific controls for making this determination are not
> architected by this spec''.
>
>
> So is there some spec or document to describe how to set the RC? Any
> suggestion is appreciated.

Not that I'm aware of, but the folks I cc'd would know a lot more
about this area.

Bjorn

\
 
 \ /
  Last update: 2018-12-29 03:30    [W:0.083 / U:1.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site