lkml.org 
[lkml]   [2018]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] USB: storage: don't insert sane sense for SPC3+ when bad sense specified
From
Date
在 2018-12-27四的 22:34 +0800,Icenowy Zheng写道:
> Currently the code will set US_FL_SANE_SENSE flag unconditionally if
> device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
> prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
> which claims SPC4, will show strange behavior with 96-byte sense
> (put the chip into a wrong state that cannot read/write anything).
>
> Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE
> on
> SPC4+ devices.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---

I forgot to:

Cc: stable@vger.kernel.org

> drivers/usb/storage/scsiglue.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/storage/scsiglue.c
> b/drivers/usb/storage/scsiglue.c
> index fde2e71a6ade..699fe9557127 100644
> --- a/drivers/usb/storage/scsiglue.c
> +++ b/drivers/usb/storage/scsiglue.c
> @@ -236,7 +236,8 @@ static int slave_configure(struct scsi_device
> *sdev)
> sdev->try_rc_10_first = 1;
>
> /* assume SPC3 or latter devices support sense size >
> 18 */
> - if (sdev->scsi_level > SCSI_SPC_2)
> + if (sdev->scsi_level > SCSI_SPC_2 &&
> + !(us->fflags & US_FL_BAD_SENSE))
> us->fflags |= US_FL_SANE_SENSE;
>
> /*

\
 
 \ /
  Last update: 2018-12-27 15:38    [W:0.053 / U:30.308 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site