lkml.org 
[lkml]   [2018]   [Dec]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 09/10] perf/x86: function to check lbr user callstack mode
Date
This patch adds a function to check if the lbr_sel value has the user
callstack mode set. The related LBR_* macros are moved to the
perf_event.h as well.

Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
---
arch/x86/events/intel/lbr.c | 38 -------------------------------
arch/x86/include/asm/perf_event.h | 48 +++++++++++++++++++++++++++++++++++++++
2 files changed, 48 insertions(+), 38 deletions(-)

diff --git a/arch/x86/events/intel/lbr.c b/arch/x86/events/intel/lbr.c
index 0225ac9..71fd76a 100644
--- a/arch/x86/events/intel/lbr.c
+++ b/arch/x86/events/intel/lbr.c
@@ -27,44 +27,6 @@ static const enum {
[LBR_FORMAT_EIP_FLAGS2] = LBR_EIP_FLAGS | LBR_TSX,
};

-/*
- * Intel LBR_SELECT bits
- * Intel Vol3a, April 2011, Section 16.7 Table 16-10
- *
- * Hardware branch filter (not available on all CPUs)
- */
-#define LBR_KERNEL_BIT 0 /* do not capture at ring0 */
-#define LBR_USER_BIT 1 /* do not capture at ring > 0 */
-#define LBR_JCC_BIT 2 /* do not capture conditional branches */
-#define LBR_REL_CALL_BIT 3 /* do not capture relative calls */
-#define LBR_IND_CALL_BIT 4 /* do not capture indirect calls */
-#define LBR_RETURN_BIT 5 /* do not capture near returns */
-#define LBR_IND_JMP_BIT 6 /* do not capture indirect jumps */
-#define LBR_REL_JMP_BIT 7 /* do not capture relative jumps */
-#define LBR_FAR_BIT 8 /* do not capture far branches */
-#define LBR_CALL_STACK_BIT 9 /* enable call stack */
-
-/*
- * Following bit only exists in Linux; we mask it out before writing it to
- * the actual MSR. But it helps the constraint perf code to understand
- * that this is a separate configuration.
- */
-#define LBR_NO_INFO_BIT 63 /* don't read LBR_INFO. */
-
-#define LBR_KERNEL (1 << LBR_KERNEL_BIT)
-#define LBR_USER (1 << LBR_USER_BIT)
-#define LBR_JCC (1 << LBR_JCC_BIT)
-#define LBR_REL_CALL (1 << LBR_REL_CALL_BIT)
-#define LBR_IND_CALL (1 << LBR_IND_CALL_BIT)
-#define LBR_RETURN (1 << LBR_RETURN_BIT)
-#define LBR_REL_JMP (1 << LBR_REL_JMP_BIT)
-#define LBR_IND_JMP (1 << LBR_IND_JMP_BIT)
-#define LBR_FAR (1 << LBR_FAR_BIT)
-#define LBR_CALL_STACK (1 << LBR_CALL_STACK_BIT)
-#define LBR_NO_INFO (1ULL << LBR_NO_INFO_BIT)
-
-#define LBR_PLM (LBR_KERNEL | LBR_USER)
-
#define LBR_SEL_MASK 0x3ff /* valid bits in LBR_SELECT */
#define LBR_NOT_SUPP -1 /* LBR filter not supported */
#define LBR_IGN 0 /* ignored */
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index eee09b7..5c1d3ed 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -90,6 +90,45 @@
#define X86_PERF_CAP_MASK_LBR_FMT 0x3f

/*
+ * Intel LBR_SELECT bits
+ * Intel Vol3a, April 2011, Section 16.7 Table 16-10
+ *
+ * Hardware branch filter (not available on all CPUs)
+ */
+#define LBR_KERNEL_BIT 0 /* do not capture at ring0 */
+#define LBR_USER_BIT 1 /* do not capture at ring > 0 */
+#define LBR_JCC_BIT 2 /* do not capture conditional branches */
+#define LBR_REL_CALL_BIT 3 /* do not capture relative calls */
+#define LBR_IND_CALL_BIT 4 /* do not capture indirect calls */
+#define LBR_RETURN_BIT 5 /* do not capture near returns */
+#define LBR_IND_JMP_BIT 6 /* do not capture indirect jumps */
+#define LBR_REL_JMP_BIT 7 /* do not capture relative jumps */
+#define LBR_FAR_BIT 8 /* do not capture far branches */
+#define LBR_CALL_STACK_BIT 9 /* enable call stack */
+
+/*
+ * Following bit only exists in Linux; we mask it out before writing it to
+ * the actual MSR. But it helps the constraint perf code to understand
+ * that this is a separate configuration.
+ */
+#define LBR_NO_INFO_BIT 63 /* don't read LBR_INFO. */
+
+#define LBR_KERNEL (1 << LBR_KERNEL_BIT)
+#define LBR_USER (1 << LBR_USER_BIT)
+#define LBR_JCC (1 << LBR_JCC_BIT)
+#define LBR_REL_CALL (1 << LBR_REL_CALL_BIT)
+#define LBR_IND_CALL (1 << LBR_IND_CALL_BIT)
+#define LBR_RETURN (1 << LBR_RETURN_BIT)
+#define LBR_REL_JMP (1 << LBR_REL_JMP_BIT)
+#define LBR_IND_JMP (1 << LBR_IND_JMP_BIT)
+#define LBR_FAR (1 << LBR_FAR_BIT)
+#define LBR_CALL_STACK (1 << LBR_CALL_STACK_BIT)
+#define LBR_NO_INFO (1ULL << LBR_NO_INFO_BIT)
+
+#define LBR_PLM (LBR_KERNEL | LBR_USER)
+#define LBR_USER_CALLSTACK (LBR_CALL_STACK | LBR_USER)
+
+/*
* Intel "Architectural Performance Monitoring" CPUID
* detection/enumeration details:
*/
@@ -311,6 +350,15 @@ static inline void perf_events_lapic_init(void) { }
static inline void perf_check_microcode(void) { }
#endif

+/*
+ * Returns true if the msr value is configured to the user callstack mode.
+ * Otherwise, false.
+ */
+static inline bool lbr_select_user_callstack(u64 lbr_select)
+{
+ return !!(lbr_select & LBR_USER_CALLSTACK);
+}
+
#ifdef CONFIG_CPU_SUP_INTEL
extern void intel_pt_handle_vmx(int on);
#endif
--
2.7.4
\
 
 \ /
  Last update: 2018-12-26 11:01    [W:0.199 / U:25.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site