lkml.org 
[lkml]   [2018]   [Dec]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 0/9] i2c: move handling of suspended adapters to the core
From
Date
Hi,

On 26-12-18 12:01, Geert Uytterhoeven wrote:
> Hi Wolfram,
>
> On Sat, Dec 22, 2018 at 9:26 PM Wolfram Sang
> <wsa+renesas@sang-engineering.com> wrote:
>> Here is the new version without specific I2C helpers but using the
>> 'is_suspended' flag from the PM core. I didn't like messing with the
>> flag directly, so I did a helper in patch 1. So far, I like the
>> approach. The diffstat looks nice, and i2c-rcar.c and i2c-sh_mobile.c
>> rejected rightfully too later transfers without further modifications.
>> Tested on a Renesas Lager board (R-Car H2).
>>
>> I dropped a few Tested-by tags because I think this approach is too
>> different from V1 to keep them. I hope you guys can have a look again.
>> Thanks for all the testing, so far!
>>
>> A branch can be found here:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/i2c/reject-when-suspended
>>
>> If this series is acceptable, I'd suggest to take it via my i2c tree
>> after rc1. And then I'll provide an immutable branch for the PM tree to
>> pick. Let me know if this works for you.
>
> This breaks resume of the CS2000 clock driver on Salvator-X(S) (and
> presumable ULCB, too):
>
> Accessing already suspended I2C/SMBus adapter
> WARNING: CPU: 1 PID: 1186 at drivers/i2c/i2c-core-smbus.c:551
> __i2c_smbus_xfer+0x38/0x66c
> Modules linked in:
> CPU: 1 PID: 1186 Comm: s2idle Not tainted
> 4.20.0-salvator-x-08442-ge5992c41ac706409 #264
> Hardware name: Renesas Salvator-X board based on r8a7795 ES1.x (DT)
> pstate: 60400005 (nZCv daif +PAN -UAO)
> pc : __i2c_smbus_xfer+0x38/0x66c
> lr : __i2c_smbus_xfer+0x38/0x66c
> sp : ffffff8013413880
> x29: ffffff8013413880 x28: ffffffc6f78b4820
> x27: 0000000000000010 x26: ffffff8010cf6178
> x25: ffffff8013413976 x24: 0000000000000002
> x23: 0000000000000016 x22: ffffffc6f7872088
> x21: 0000000000000000 x20: 000000000000004f
> x19: ffffffc6f7872088 x18: 000000000000000a
> x17: 0000000000000000 x16: 0000000000000000
> x15: 0000000000029c80 x14: 0720072007200720
> x13: 0720072007200720 x12: 0720072007200720
> x11: 0720072007200720 x10: 0720072007200720
> x9 : ffffff801100e6d0 x8 : 6461207375424d53
> x7 : ffffff8011c825c8 x6 : ffffff8011c82000
> x5 : 0000000000000000 x4 : ffffff8013414000
> x3 : ffffff80134136e0 x2 : 00000046ee875000
> x1 : 82c6d7c720d64000 x0 : 0000000000000000
> Call trace:
> __i2c_smbus_xfer+0x38/0x66c
> i2c_smbus_xfer+0x64/0x98
> i2c_smbus_read_byte_data+0x40/0x6c
> cs2000_bset.isra.1+0x2c/0x58
> __cs2000_set_rate.constprop.7+0x8c/0x134
> cs2000_resume+0x14/0x1c
> dpm_run_callback+0x15c/0x2d8
> device_resume_early+0x98/0xec
> dpm_resume_early+0x3b0/0x454
> suspend_devices_and_enter+0x7bc/0xbb0
>
> The CS2000 driver uses SET_LATE_SYSTEM_SLEEP_PM_OPS().
>
> Suspend/resume of the BD9571 driver works fine, as that one uses
> SET_SYSTEM_SLEEP_PM_OPS().

Ok, so this is the same thing I noticed, the approach using
the pm-core is_suspend flag only works for adapters which
suspend during the regular suspend phase and as such that
approach cannot work everywhere.

Regards,

Hans

\
 
 \ /
  Last update: 2018-12-26 12:46    [W:0.123 / U:7.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site