lkml.org 
[lkml]   [2018]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v2 00/14] Add support for STM32F4 SPI
    Date
    From: Cezary Gapinski <cezary.gapinski@gmail.com>

    This series of patches adds support for first generation of SPI
    interface for STM32F4 family.

    This version of driver is mostly different to STM32H7 one. Based on
    linux kernel I2C drivers for STM32 where drivers were splited into
    STM32F4 and STM32F7 family the same approach seems to be sufficient for
    SPI STM32 drivers. Therefore STM32H7 driver was moved to spi-stm32h7.c
    file and register and functions were renamed to be more specific to
    STM32H7.

    For current version master mode with full-duplex and 8/16 bit data
    frame format are supported. There is no TX and RX FIFOs like
    in STM32H7. DMA capabilility is supported for messages longer than
    arbitrary number of bytes (that is set already to 16 bytes) when TX
    and RX channels are set at the same time.

    v2:
    Based on Amelie Delaunay recommendation only one common file
    spi-stm32.c is used. Before adding support for STM32F4 driver, first six
    patches adds some improvements to actual driver.
    Next patches rearrange driver to be more useful for new STM32F4 SPI
    and adding support for this family.
    This version also supports simplex-tx and 3wire-tx modes.

    Cezary Gapinski (14):
    spi: stm32: switch to SPDX identifier
    spi: stm32: use NULL pointer instead of plain integer
    spi: stm32: fix DMA configuration with only one channel
    spi: fix typo in SPI_STM32 help text
    spi: stm32: use explicit CPOL and CPHA mode bits
    spi: stm32: remove SPI LOOP mode
    spi: stm32: rename STM32 SPI registers to STM32H7
    spi: stm32: rename interrupt function
    spi: stm32: split transfer one setup function
    spi: stm32: add start dma transfer function
    spi: stm32: introduce compatible data cfg
    spi: stm32: add support for STM32F4
    ARM: dts: stm32: add SPI support on STM32F429 SoC
    spi: stm32: add description about STM32F4 bindings

    .../devicetree/bindings/spi/spi-stm32.txt | 9 +-
    arch/arm/boot/dts/stm32f429.dtsi | 60 +
    drivers/spi/Kconfig | 2 +-
    drivers/spi/spi-stm32.c | 1403 +++++++++++++++-----
    4 files changed, 1139 insertions(+), 335 deletions(-)

    --
    2.7.4

    \
     
     \ /
      Last update: 2018-12-24 23:03    [W:5.473 / U:0.044 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site