lkml.org 
[lkml]   [2018]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V6] iio: magnetometer: mag3110: add vdd/vddio regulator operation support
Date
The magnetometer's power supplies could be controllable on some platforms,
such as i.MX6Q-SABRESD board, the mag3110's power supplies are controlled
by a GPIO fixed regulator, need to make sure the regulators are enabled
before any communication with mag3110, this patch adds vdd/vddio regulator
operation support.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
ChangeLog since V5:
Make sure both vdd and vddio regulators are aquired before enabling any one of them.
---
drivers/iio/magnetometer/mag3110.c | 88 ++++++++++++++++++++++++++++++++++----
1 file changed, 80 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c
index f063355..f56a99a 100644
--- a/drivers/iio/magnetometer/mag3110.c
+++ b/drivers/iio/magnetometer/mag3110.c
@@ -20,6 +20,7 @@
#include <linux/iio/buffer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/delay.h>
+#include <linux/regulator/consumer.h>

#define MAG3110_STATUS 0x00
#define MAG3110_OUT_X 0x01 /* MSB first */
@@ -56,6 +57,8 @@ struct mag3110_data {
struct mutex lock;
u8 ctrl_reg1;
int sleep_val;
+ struct regulator *vdd_reg;
+ struct regulator *vddio_reg;
};

static int mag3110_request(struct mag3110_data *data)
@@ -469,17 +472,44 @@ static int mag3110_probe(struct i2c_client *client,
struct iio_dev *indio_dev;
int ret;

- ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I);
- if (ret < 0)
- return ret;
- if (ret != MAG3110_DEVICE_ID)
- return -ENODEV;
-
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;

data = iio_priv(indio_dev);
+
+ data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
+ data->vddio_reg = devm_regulator_get(&client->dev, "vddio");
+ if (IS_ERR(data->vdd_reg) || IS_ERR(data->vddio_reg)) {
+ if (PTR_ERR(data->vdd_reg) == -EPROBE_DEFER ||
+ PTR_ERR(data->vddio_reg) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ dev_err(&client->dev, "failed to get VDD/VDDIO regulator!\n");
+ return IS_ERR(data->vdd_reg) ?
+ PTR_ERR(data->vdd_reg) : PTR_ERR(data->vddio_reg);
+ }
+
+ ret = regulator_enable(data->vdd_reg);
+ if (ret) {
+ dev_err(&client->dev, "failed to enable VDD regulator!\n");
+ return ret;
+ }
+
+ ret = regulator_enable(data->vddio_reg);
+ if (ret) {
+ dev_err(&client->dev, "failed to enable VDDIO regulator!\n");
+ goto disable_regulator_vdd;
+ }
+
+ ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I);
+ if (ret < 0)
+ goto disable_regulators;
+ if (ret != MAG3110_DEVICE_ID) {
+ ret = -ENODEV;
+ goto disable_regulators;
+ }
+
data->client = client;
mutex_init(&data->lock);

@@ -499,7 +529,7 @@ static int mag3110_probe(struct i2c_client *client,

ret = mag3110_change_config(data, MAG3110_CTRL_REG1, data->ctrl_reg1);
if (ret < 0)
- return ret;
+ goto disable_regulators;

ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG2,
MAG3110_CTRL_AUTO_MRST_EN);
@@ -520,16 +550,24 @@ static int mag3110_probe(struct i2c_client *client,
iio_triggered_buffer_cleanup(indio_dev);
standby_on_error:
mag3110_standby(iio_priv(indio_dev));
+disable_regulators:
+ regulator_disable(data->vddio_reg);
+disable_regulator_vdd:
+ regulator_disable(data->vdd_reg);
+
return ret;
}

static int mag3110_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct mag3110_data *data = iio_priv(indio_dev);

iio_device_unregister(indio_dev);
iio_triggered_buffer_cleanup(indio_dev);
mag3110_standby(iio_priv(indio_dev));
+ regulator_disable(data->vddio_reg);
+ regulator_disable(data->vdd_reg);

return 0;
}
@@ -537,14 +575,48 @@ static int mag3110_remove(struct i2c_client *client)
#ifdef CONFIG_PM_SLEEP
static int mag3110_suspend(struct device *dev)
{
- return mag3110_standby(iio_priv(i2c_get_clientdata(
+ struct mag3110_data *data = iio_priv(i2c_get_clientdata(
+ to_i2c_client(dev)));
+ int ret;
+
+ ret = mag3110_standby(iio_priv(i2c_get_clientdata(
to_i2c_client(dev))));
+ if (ret)
+ return ret;
+
+ ret = regulator_disable(data->vddio_reg);
+ if (ret) {
+ dev_err(dev, "failed to disable VDDIO regulator\n");
+ return ret;
+ }
+
+ ret = regulator_disable(data->vdd_reg);
+ if (ret) {
+ dev_err(dev, "failed to disable VDD regulator\n");
+ return ret;
+ }
+
+ return 0;
}

static int mag3110_resume(struct device *dev)
{
struct mag3110_data *data = iio_priv(i2c_get_clientdata(
to_i2c_client(dev)));
+ int ret;
+
+ ret = regulator_enable(data->vdd_reg);
+ if (ret) {
+ dev_err(dev, "failed to enable VDD regulator\n");
+ return ret;
+ }
+
+ ret = regulator_enable(data->vddio_reg);
+ if (ret) {
+ dev_err(dev, "failed to enable VDDIO regulator\n");
+ regulator_disable(data->vdd_reg);
+ return ret;
+ }

return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
data->ctrl_reg1);
--
2.7.4
\
 
 \ /
  Last update: 2022-09-17 16:05    [W:0.068 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site