lkml.org 
[lkml]   [2018]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 00/14] Add support for FM radio in hcill and kill TI_ST
Hi!

> > This moves all remaining users of the legacy TI_ST driver to hcill (patches
> > 1-3). Then patches 4-7 convert wl128x-radio driver to a standard platform
> > device driver with support for multiple instances. Patch 7 will result in
> > (userless) TI_ST driver no longer supporting radio at runtime. Patch 8-11 do
> > some cleanups in the wl128x-radio driver. Finally patch 12 removes the TI_ST
> > specific parts from wl128x-radio and adds the required infrastructure to use it
> > with the serdev hcill driver instead. The remaining patches 13 and 14 remove
> > the old TI_ST code.
> >
> > The new code has been tested on the Motorola Droid 4. For testing the audio
> > should be configured to route Ext to Speaker or Headphone. Then you need to
> > plug headphone, since its cable is used as antenna. For testing there is a
> > 'radio' utility packages in Debian. When you start the utility you need to
> > specify a frequency, since initial get_frequency returns an error:
> >
> > $ radio -f 100.0
>
> Ok, it seems the driver does not work built-in, due to firmware issue:
>
> root@devuan:/home/user# dmesg | grep wl12
> [ 1.018951] reg-fixed-voltage regulator-wl12xx: GPIO lookup for
> consumer (null)
> [ 1.026550] reg-fixed-voltage regulator-wl12xx: using device tree
> for GPIO lookup
> [ 1.034271] of_get_named_gpiod_flags: can't parse 'gpios' property
> of node '/regulator-wl12xx[0]'
> [ 1.043487] of_get_named_gpiod_flags: parsed 'gpio' property of
> node '/regulator-wl12xx[0]' - status (0)
> [ 4.151885] wl12xx_driver wl12xx.1.auto: Direct firmware load for
> ti-connectivity/wl128x-nvs.bin failed with error -2
> [ 11.368286] vwl1271: disabling
> root@devuan:/home/user# find /lib/firmware/ | grep wl128
> /lib/firmware/ti-connectivity/wl128x-fw-5-plt.bin
> /lib/firmware/ti-connectivity/wl128x-fw-5-mr.bin
> /lib/firmware/ti-connectivity/wl128x-fw-5-sr.bin
> /lib/firmware/ti-connectivity/wl128x-nvs.bin
> root@devuan:/home/user#
>
> Ideas welcome... ... ... am I supposed to compile wl128-nvs.bin into
> the kernel using EXTRA_FIRMWARE?

EXTRA_FIRMWARE gets me further... some of it was not in debian.

"Speaker right" needs to be set to "Ext" in alsamixer, and then... it
works! :-)

Quality does not seem to be great, but that may be mixer settings or
something.

Thanks!
Pavel

Tested-by: Pavel Machek <pavel@ucw.cz>

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-12-22 23:42    [W:0.739 / U:0.292 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site