lkml.org 
[lkml]   [2018]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: meson: add specific simplefb bindings
On Mon, Dec 10, 2018 at 10:06:39AM +0100, Maxime Jourdan wrote:
> Similar to simple-framebuffer-sunxi, we support different display pipelines
> that the firmware is free to choose from.
>
> This documents the "amlogic,simple-framebuffer" compatible and the
> "amlogic,pipeline" extension.
>
> Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
> ---
> .../display/simple-framebuffer-meson.txt | 33 +++++++++++++++++++
> 1 file changed, 33 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/simple-framebuffer-meson.txt
>
> diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer-meson.txt b/Documentation/devicetree/bindings/display/simple-framebuffer-meson.txt
> new file mode 100644
> index 000000000000..122a5c005cd9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/simple-framebuffer-meson.txt
> @@ -0,0 +1,33 @@
> +Meson specific Simple Framebuffer bindings
> +
> +This binding documents meson specific extensions to the simple-framebuffer
> +bindings. The meson simplefb u-boot code relies on the devicetree containing
> +pre-populated simplefb nodes.
> +
> +These extensions are intended so that u-boot can select the right node based
> +on which pipeline is being used. As such they are solely intended for
> +firmware / bootloader use, and the OS should ignore them.
> +
> +Required properties:
> +- compatible: "amlogic,simple-framebuffer"

And a fallback?

> +- amlogic,pipeline, one of:
> + "vpu-cvbs"
> + "vpu-hdmi"
> +
> +Example:
> +
> +chosen {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + framebuffer@0 {

Without 'reg', you shouldn't have a unit-address.

> + compatible = "amlogic,simple-framebuffer",
> + "simple-framebuffer";
> + amlogic,pipeline = "vpu-hdmi";
> + clocks = <&clkc CLKID_HDMI_PCLK>,
> + <&clkc CLKID_CLK81>,
> + <&clkc CLKID_GCLK_VENCI_INT0>;
> + power-domains = <&pwrc_vpu>;
> + };
> +};
> --
> 2.19.2
>

\
 
 \ /
  Last update: 2018-12-20 20:53    [W:0.046 / U:32.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site