lkml.org 
[lkml]   [2018]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 4/5] Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer
Date
During hci down we observed IBS sleep commands are queued in the Tx
buffer and hci_uart_write_work is sending data to the chip which is
not required as the chip is powered off. This patch will disable IBS
and flush the Tx buffer before we turn off the chip.

Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
drivers/bluetooth/hci_qca.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 52de0b5a0620..cccc9a525926 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1286,6 +1286,8 @@ static void qca_power_shutdown(struct hci_uart *hu)
* still open, discard all the garbage data received on the Rx line.
*/
set_bit(STATE_DISCARD_RX, &qca->flags);
+ clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+ qca_flush(hu);
serdev_device_write_flush(hu->serdev);
host_set_baudrate(hu, 2400);
qca_send_power_pulse(hu, QCA_WCN3990_POWEROFF_PULSE);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2018-12-20 15:47    [W:0.204 / U:0.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site