lkml.org 
[lkml]   [2018]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 2/9] dt/bindings: drm/komeda: Add DT bindings for ARM display processor D71
Date
On Wed, Dec 19, 2018 at 07:55:44AM -0600, Rob Herring wrote:
> On Wed, Dec 19, 2018 at 6:33 AM james qian wang (Arm Technology China)
> <james.qian.wang@arm.com> wrote:
> >
> > Add DT bindings documentation for the ARM display processor D71 and later
> > IPs.
> >
> > Signed-off-by: James (Qian) Wang <james.qian.wang@arm.com>
> > ---
> > .../bindings/display/arm/arm,komeda.txt | 87 +++++++++++++++++++
> > 1 file changed, 87 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/display/arm/arm,komeda.txt
> >
> > diff --git a/Documentation/devicetree/bindings/display/arm/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm/arm,komeda.txt
> > new file mode 100644
> > index 000000000000..d4b53c11b2a2
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/arm/arm,komeda.txt
> > @@ -0,0 +1,87 @@
> > +Device Tree bindings for ARM Komeda display driver
> > +
> > +Required properties:
> > +- compatible: Should be "arm,mali-d71"
> > +- reg: Physical base address and length of the registers in the system
> > +- interrupts: the interrupt line numbers of the device in the system
>
> How many?

Sorry, only one interrupt. will fix it in the next version.

> > +- interrupt-names: contains the names of the IRQs in the order they were
> > + provided in the "interrupts" property. Must contain: "DPU".
>
> There's no point in *-names when there is only one entry.
>
> > +- clocks: A list of phandle + clock-specifier pairs, one for each entry
> > + in 'clock-names'
> > +- clock-names: A list of clock names. It should contain:
> > + - "pclk": for the APB interface clock
> > + - "mclk": for the main processor clock
>
> The order here doesn't match the example.

will fix it.

>
> > +- #address-cells: Must be 1
> > +- #size-cells: Must be 0
> > +
> > +Required properties for sub-node: pipeline@nq
> > +Each device contains one or two pipeline sub-nodes (at least one), each
> > +pipeline node should provide properties:
> > +- reg: Zero-indexed identifier for the pipeline
> > +- clocks: A list of phandle + clock-specifier pairs, one for each entry
> > + in 'clock-names'
> > +- clock-names: should contain:
> > + - "aclk": AXI interface clock
> > + - "pxclk": pixel clock
>
> The order here doesn't match the example.
>

will fix it in the next version.

> > +
> > +- port: each pipeline connect to an encoder input port. The connection is
> > + modelled using the OF graph bindings specified in
>
> modeled

will fix it.

>
> > + Documentation/devicetree/bindings/graph.txt
> > +
> > +Optional properties:
> > + - memory-region: phandle to a node describing memory (see
> > + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
> > + to be used for the framebuffer; if not present, the framebuffer may
> > + be located anywhere in memory.
> > +
> > +Example:
> > +/ {
> > + ...
> > +
> > + dp0: display@c00000 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "arm,mali-d71";
> > + reg = <0xc00000 0x20000>;
> > + interrupts = <0 168 4>;
> > + interrupt-names = "DPU";
> > + clocks = <&dpu_mclk>, <&dpu_aclk>;
> > + clock-names = "mclk", "pclk";
> > +
> > + pl0: pipeline@0 {
> > + clocks = <&fpgaosc2>, <&dpu_aclk>;
> > + clock-names = "pxclk", "aclk";
> > + reg = <0>;
>
> Is there a register range for each pipeline? If so, using that here
> would be better than index.

Sorry, there is no register range for the pipeline.

>
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
>
> You can drop 'ports' moving port up a level. And for a single port,
> you don't need reg.

you're right will fix it.
>
> > + dp0_pl0_out: endpoint {
> > + remote-endpoint = <&db_dvi0_in>;
> > + };
> > + };
> > + };
> > + };
> > + pl1: pipeline@1 {
> > + clocks = <&fpgaosc2>, <&dpu_aclk>;
> > + clock-names = "pxclk", "aclk";
> > + reg = <1>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > + dp0_pl1_out: endpoint {
> > + remote-endpoint = <&db_dvi1_in>;
> > + };
> > + };
> > + };
> > + };
> > + };
> > + ...
> > +};
> > --
> > 2.17.1
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel

\
 
 \ /
  Last update: 2018-12-20 11:55    [W:0.067 / U:8.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site