lkml.org 
[lkml]   [2018]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 11/67] net: ethernet: ave: Replace NET_IP_ALIGN with AVE_FRAME_HEADROOM
Date
4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 88113957ddb7b7d5451e28cd708c82ea7e63b097 ]

In commit 26a4676faa1a ("arm64: mm: define NET_IP_ALIGN to 0"),
AVE controller affects this modification because the controller forces
to ignore lower 2bits of buffer start address, and make 2-byte headroom,
that is, data reception starts from (buffer + 2).

This patch defines AVE_FRAME_HEADROOM macro as hardware-specific value,
and replaces NET_IP_ALIGN with it.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/socionext/sni_ave.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/socionext/sni_ave.c b/drivers/net/ethernet/socionext/sni_ave.c
index f7ecceeb1e28..f27d67a4d304 100644
--- a/drivers/net/ethernet/socionext/sni_ave.c
+++ b/drivers/net/ethernet/socionext/sni_ave.c
@@ -194,6 +194,7 @@

/* Parameter for ethernet frame */
#define AVE_MAX_ETHFRAME 1518
+#define AVE_FRAME_HEADROOM 2

/* Parameter for interrupt */
#define AVE_INTM_COUNT 20
@@ -585,12 +586,13 @@ static int ave_rxdesc_prepare(struct net_device *ndev, int entry)

skb = priv->rx.desc[entry].skbs;
if (!skb) {
- skb = netdev_alloc_skb_ip_align(ndev,
- AVE_MAX_ETHFRAME);
+ skb = netdev_alloc_skb(ndev, AVE_MAX_ETHFRAME);
if (!skb) {
netdev_err(ndev, "can't allocate skb for Rx\n");
return -ENOMEM;
}
+ skb->data += AVE_FRAME_HEADROOM;
+ skb->tail += AVE_FRAME_HEADROOM;
}

/* set disable to cmdsts */
@@ -603,12 +605,12 @@ static int ave_rxdesc_prepare(struct net_device *ndev, int entry)
* - Rx buffer begins with 2 byte headroom, and data will be put from
* (buffer + 2).
* To satisfy this, specify the address to put back the buffer
- * pointer advanced by NET_IP_ALIGN by netdev_alloc_skb_ip_align(),
- * and expand the map size by NET_IP_ALIGN.
+ * pointer advanced by AVE_FRAME_HEADROOM, and expand the map size
+ * by AVE_FRAME_HEADROOM.
*/
ret = ave_dma_map(ndev, &priv->rx.desc[entry],
- skb->data - NET_IP_ALIGN,
- AVE_MAX_ETHFRAME + NET_IP_ALIGN,
+ skb->data - AVE_FRAME_HEADROOM,
+ AVE_MAX_ETHFRAME + AVE_FRAME_HEADROOM,
DMA_FROM_DEVICE, &paddr);
if (ret) {
netdev_err(ndev, "can't map skb for Rx\n");
--
2.19.1


\
 
 \ /
  Last update: 2018-12-20 10:36    [W:0.250 / U:5.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site