lkml.org 
[lkml]   [2018]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 17/67] drm/msm/dsi: configure VCO rate for 10nm PLL driver
Date
4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 8531f0587f5c9e1a74cd9543a97617349f5e0706 ]

Currenty the VCO rate in the 10nm PLL driver relies
on the parent rate which is not configured.

Configure the VCO rate to 19.2 Mhz as required by
the 10nm PLL driver.

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
index 4c03f0b7343e..41bec570c518 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
@@ -39,6 +39,8 @@
#define DSI_PIXEL_PLL_CLK 1
#define NUM_PROVIDED_CLKS 2

+#define VCO_REF_CLK_RATE 19200000
+
struct dsi_pll_regs {
u32 pll_prop_gain_rate;
u32 pll_lockdet_rate;
@@ -316,7 +318,7 @@ static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
parent_rate);

pll_10nm->vco_current_rate = rate;
- pll_10nm->vco_ref_clk_rate = parent_rate;
+ pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;

dsi_pll_setup_config(pll_10nm);

--
2.19.1


\
 
 \ /
  Last update: 2018-12-20 10:35    [W:0.215 / U:4.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site