lkml.org 
[lkml]   [2018]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mailbox: Hi3660: Fixup mailbox state machine malfunction issue
Date
Current mailbox driver of Hi3660 release the mailbox directly
before sending a new message which may cause last message lost
and next message sending doesn't take effect actually.

This patch fixs this issue by following the right progress below,
each time before sending a message, mailbox driver will check
whether the mailbox is in ready state, if last message has been
acknowledged, the mailbox driver will clear the ack state to turn
the mailbox to ready state again.

Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com>
---
drivers/mailbox/hi3660-mailbox.c | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/mailbox/hi3660-mailbox.c b/drivers/mailbox/hi3660-mailbox.c
index 3eea6b6..035b71a 100644
--- a/drivers/mailbox/hi3660-mailbox.c
+++ b/drivers/mailbox/hi3660-mailbox.c
@@ -38,6 +38,7 @@
#define MBOX_AUTOMATIC_ACK 1

#define MBOX_STATE_IDLE BIT(4)
+#define MBOX_STATE_READY BIT(5)
#define MBOX_STATE_ACK BIT(7)

#define MBOX_MSG_LEN 8
@@ -91,8 +92,8 @@ static int hi3660_mbox_check_state(struct mbox_chan *chan)
unsigned long val;
unsigned int ret;

- /* Mailbox is idle so directly bail out */
- if (readl(base + MBOX_MODE_REG) & MBOX_STATE_IDLE)
+ /* Mailbox is ready to use */
+ if (readl(base + MBOX_MODE_REG) & MBOX_STATE_READY)
return 0;

/* Wait for acknowledge from remote */
@@ -103,9 +104,9 @@ static int hi3660_mbox_check_state(struct mbox_chan *chan)
return ret;
}

- /* Ensure channel is released */
- writel(0xffffffff, base + MBOX_IMASK_REG);
- writel(BIT(mchan->ack_irq), base + MBOX_SRC_REG);
+ /* clear ack state, mailbox will get back to ready state */
+ writel(BIT(mchan->ack_irq), base + MBOX_ICLR_REG);
+
return 0;
}

@@ -160,10 +161,6 @@ static int hi3660_mbox_startup(struct mbox_chan *chan)
{
int ret;

- ret = hi3660_mbox_check_state(chan);
- if (ret)
- return ret;
-
ret = hi3660_mbox_unlock(chan);
if (ret)
return ret;
@@ -183,10 +180,11 @@ static int hi3660_mbox_send_data(struct mbox_chan *chan, void *msg)
void __iomem *base = MBOX_BASE(mbox, ch);
u32 *buf = msg;
unsigned int i;
+ int ret;

- /* Ensure channel is released */
- writel_relaxed(0xffffffff, base + MBOX_IMASK_REG);
- writel_relaxed(BIT(mchan->ack_irq), base + MBOX_SRC_REG);
+ ret = hi3660_mbox_check_state(chan);
+ if (ret)
+ return ret;

/* Clear mask for destination interrupt */
writel_relaxed(~BIT(mchan->dst_irq), base + MBOX_IMASK_REG);
--
2.8.1
\
 
 \ /
  Last update: 2018-12-03 05:16    [W:1.131 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site