lkml.org 
[lkml]   [2018]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 00/17] Add support for TI PRU ICSS
On Thu, Nov 22, 2018 at 01:38:56PM +0200, Roger Quadros wrote:
> Hi,
>
> The Programmable Real-Time Unit and Industrial Communication Subsystem
> (PRU-ICSS) is present on various TI SoCs such as AM335x, AM437x, AM57x,
> Keystone 66AK2G, etc. A PRUSS consists of dual 32-bit RISC cores (Programmable
> Real-Time Units, or PRUs), data and instruction RAMs, shard RAM, and
> interrupt controller and some internal peripheral modules to facilitate
> industrial communication. The programmable nature of the PRUs provide
> flexibility to implement custom peripheral interfaces, fast real-time
> responses, or specialized data handling. The common peripheral modules
> include the following,
> - an MII_RT module with two MII ports for Ethernet
> - an MDIO port for external Ethernet PHYs
> - an Industrial Ethernet Peripheral (IEP) to manage/generate Industrial
> Ethernet functions
> - an Enhanced Capture Module (eCAP)
> - an Industrial Ethernet Timer with 7/9 capture and 16 compare events
> - a 16550-compatible UART to support PROFIBUS
>
> A typical usage scenario would be to load the application firmware into
> one or more of the PRU cores, initialize one or more of the peripherals
> and perform I/O through shared RAM (or MSMC RAM) from either a Kernel driver
> or directly from userspace.
>
> With this two-part series we should be able to use the kernel RPMSG driver
> along with firmware and user-space examples in the
> pru-software-support-package [1].
>
> We will also be able to get Dual Ethernet functionality using a kernel driver
> which will be posted later.
>
> The kernel code will be split into the following sections
>
> 1) soc: pruss_soc_bus: The sole purpose of this driver is to handle platform
> specific Power management quirks and allow the child node (i.e entire PRUSS)
> to be unbound from the default kernel driver and bound to something else. e.g. uio_pruss,
> while allowing to manage PM in the kernel.
>
> 2) soc: pruss: This is the driver for the entire ICSS. Its main purpose is
> to populate the different modules and handle platform specific quirks.
> It will also manage the interrupt controller and provide kernel APIs to
> change ICSS specific knobs in the CFG space e.g. GP_MUX.
>
> 3) remoteproc: pru: This provides a remoteproc interface for the PRU cores.
> With this we can load firmware, start/stop PRU from kernel or userspace.
> It adds support for virtio RPMSG. It also provides some kernel APIs
> (e.g. pru_rproc_set_ctable()) that are PRU specific and required for
> in-kernel applications (e.g. ethernet)
>
> 4) ARM: OMAP: DTS:
> Platform data and device tree files.
>
> Due to the large number of patches patches are split this into 2 email threads.
> This thread covers (1), (3) and (4).
>
> A second thread will cover the remoteproc driver (3).
>
> The series only adds platform support for AM335x to keep patch count small.
> Support for other platforms (AM43x, AM57x, K2G) will be added later.
>
> Testing:
> To test the code with example firmware you can try the LAB5 tutorial
> http://processors.wiki.ti.com/index.php/PRU_Training:_Hands-on_Labs#LAB_5:_RPMsg_Communication_between_ARM_and_PRU
> with the pru-software-support package at [2] and the sample rpmsg-client driver.
> NOTE: you no longer need to build and run PRU_Halt example as shown in the tutorial.
>
> cheers,
> -roger
>
> [1] https://git.ti.com/pru-software-support-package
> NOTE: The repo needs update to the INTC resource data structures
> The updates that are required are listed in the below repo with one example fixed.
> [2] https://github.com/rogerq/pru-software-support-package/commits/upstream/pruss
>


Per Roger's instructions, I was able test both patch series on the
am335x-pocketbeagle, based on linux v4.20-rc4, with the following
additional 'rpmsg_pru' patches:

https://github.com/beagleboard/linux/commit/2b013313cae8659f2cbd659c314e471a71f1623c
https://github.com/beagleboard/linux/commit/b894d492a35aa43a7b54512b971a04b9aec17814

Tested-by: Derald D. Woods <woods.technical@gmail.com>


> Andrew F. Davis (1):
> soc: ti: pruss: add pruss_{request,release}_mem_region() API
>
> Roger Quadros (2):
> soc: ti: pruss: add pruss_cfg_read()/update() API
> soc: ti: pruss: export pruss_intc_configure/unconfigure APIs
>
> Suman Anna (13):
> dt-bindings: remoteproc: Add TI PRUSS bindings
> soc: ti: pruss: Define platform data for PRUSS bus driver
> soc: ti: pruss: Add pruss_soc_bus platform driver
> soc: ti: pruss: Fix system suspend/MStandby config issues
> soc: ti: pruss: Configure SYSCFG properly during probe/remove
> soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs
> soc: ti: pruss: enable OCP master ports in SYSCFG always
> soc: ti: pruss: Add a PRUSS irqchip driver for PRUSS interrupts
> soc: ti: pruss_intc: Add API to trigger a PRU sysevent
> ARM: OMAP2+: use pdata quirks for PRUSS reset lines on AM335x
> ARM: dts: AM33xx: Add the PRU-ICSS DT nodes
> ARM: dts: AM33xx: Add PRU system events for virtio
> ARM: dts: am335x-*: Enable PRU-ICSS nodes
>
> Tero Kristo (1):
> soc: ti: pruss: add pruss_get()/put() API
>
> .../devicetree/bindings/soc/ti/ti,pruss.txt | 360 ++++++++++++
> arch/arm/boot/dts/am335x-bone-common.dtsi | 8 +
> arch/arm/boot/dts/am335x-evm.dts | 8 +
> arch/arm/boot/dts/am335x-evmsk.dts | 8 +
> arch/arm/boot/dts/am335x-icev2.dts | 8 +
> arch/arm/boot/dts/am33xx.dtsi | 78 +++
> arch/arm/mach-omap2/pdata-quirks.c | 11 +
> drivers/soc/ti/Kconfig | 12 +
> drivers/soc/ti/Makefile | 1 +
> drivers/soc/ti/pruss.c | 306 +++++++++++
> drivers/soc/ti/pruss.h | 36 ++
> drivers/soc/ti/pruss_intc.c | 604 +++++++++++++++++++++
> drivers/soc/ti/pruss_soc_bus.c | 279 ++++++++++
> include/linux/platform_data/ti-pruss.h | 25 +
> include/linux/pruss.h | 235 ++++++++
> 15 files changed, 1979 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/ti/ti,pruss.txt
> create mode 100644 drivers/soc/ti/pruss.c
> create mode 100644 drivers/soc/ti/pruss.h
> create mode 100644 drivers/soc/ti/pruss_intc.c
> create mode 100644 drivers/soc/ti/pruss_soc_bus.c
> create mode 100644 include/linux/platform_data/ti-pruss.h
> create mode 100644 include/linux/pruss.h
>
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>

\
 
 \ /
  Last update: 2018-12-03 03:05    [W:0.367 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site