[lkml]   [2018]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/3] Reset controller support for i.MX8MQ

This patch contains changes I made in order to add support for i.MX8MQ
to reset-imx7.c in order to enable support of PCIE IP block on i.MX8MQ

NOTE: This patch depens on CONFIG_ARCH_IMX8MQ introduced in [imx8mq]

Feedback is welcome!

Andrey Smirnov

Changes since [v2]

- Constified "variant" field in struct imx7_src

- Moved dt-bindings/reset/imx8mq-reset.h to be a part of the patch
documenting DT bindings

Changes since [v1]

- Series re-written to use a per-variant LUT instead of using a
single table

- Changed driver to use "imx8mq" insead of "imx8m" to match other
drivers and CONFIG_ARCH_IMX8MQ

- Updated list of exported i.MX8MQ resets, add missing and remove
bogus ones (hopefully nothing is missing this time)


Andrey Smirnov (3):
reset: imx7: Add plubming to support multiple IP variants
dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs
reset: imx7: Add support for i.MX8MQ IP block variant

.../bindings/reset/fsl,imx7-src.txt | 7 +-
drivers/reset/Kconfig | 2 +-
drivers/reset/reset-imx7.c | 166 ++++++++++++++++--
include/dt-bindings/reset/imx8mq-reset.h | 64 +++++++
4 files changed, 220 insertions(+), 19 deletions(-)
create mode 100644 include/dt-bindings/reset/imx8mq-reset.h


 \ /
  Last update: 2018-12-17 03:39    [W:0.065 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site