lkml.org 
[lkml]   [2018]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 3/3] Input: atmel_mxt_ts: Document optional voltage regulators
Hi,

On Fri, Dec 14, 2018 at 04:12:14PM +0100, Paweł Chmiel wrote:
> Document new optional voltage regulators, which can be used
> to power down/up touchscreen.
>
> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>

-- Sebastian

> ---
> Changes from v1:
> - Added reviewed-by
> ---
> .../devicetree/bindings/input/atmel,maxtouch.txt | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
> index c88919480d37..17930ecadad3 100644
> --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
> +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
> @@ -31,6 +31,12 @@ Optional properties for main touchpad device:
>
> - reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
>
> +- avdd-supply: Analog power supply. It powers up the analog channel block
> + of the controller to detect the touches.
> +
> +- vdd-supply: Digital power supply. It powers up the digital block
> + of the controller to enable i2c communication.
> +
> Example:
>
> touch@4b {
> @@ -38,4 +44,6 @@ Example:
> reg = <0x4b>;
> interrupt-parent = <&gpio>;
> interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
> + avdd-supply = <&atsp_reg>;
> + vdd-supply = <&tsp_reg>;
> };
> --
> 2.17.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-12-16 23:42    [W:0.069 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site