lkml.org 
[lkml]   [2018]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 00/15] ARM: sunxi: Enable Broadcom-based Bluetooth controllers
On Thu, Nov 15, 2018 at 05:35:48PM +0800, Chen-Yu Tsai wrote:
> Hi everyone,
>
> This is v2 of my Broadcom-based Bluetooth controllers on Allwinner SoC-
> based SBCs series.
>
> Changes since v1:
>
> - Collected tags
> - Re-organize dt binding clocks and clock-names properties
> - Simplify check for deferred probe when getting clocks
> - Add explanation of Cubietruck's clk_out_a pinmux setting placement
> to commit message.
> - Add missing "uart-has-rtscts" property to Cubietruck device tree
>
> [snip]

Hello,

I've tested your patch series on TBS A711 / BCM20702A1 with the following DTS:


/* There's the BT part of the AP6210 connected to that UART */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm20702a1";
+ clocks = <&ac100_rtc 1>;
+ clock-names = "lpo";
+ vbat-supply = <&reg_vbat>;
+ vddio-supply = <&reg_dldo1>;
+ device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+ shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ max-speed = <1500000>;
+ };
};


And it works. :)

Tested-by: Ondrej Jirman <megous@megous.com>


Thank you and regards,
o.

\
 
 \ /
  Last update: 2018-12-14 13:43    [W:0.099 / U:1.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site