[lkml]   [2018]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [ v3 2/3] mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver
On Fri, Dec 7, 2018 at 5:53 PM Christophe Kerello
<> wrote:
> On 12/7/18 10:06 AM, Linus Walleij wrote:

> Based on FMC2 datasheet,
> The FMC2 controller includes 2 memory controllers:
> - the NOR/PSRAM memory controller
> - the NAND memory controller
> The NOR/PSRAM controller mapping is starting at 0.
> The NAND controller mapping is starting at 0x80.
> We have only planned to develop a driver for the NAND memory controller.
> There is currently no customer request to develop the NOR/PSRAM memory
> controller.

OK I get it, so there is no FSMC (v1), but a NOR controller, thanks!

If people need to access the NOR controller I think they can just patch
your driver to handle both or have a second driver on the side
(I suspect the pins are anyways set up such that you can just
use either NOR or NAND.)

Linus Walleij

 \ /
  Last update: 2018-12-13 11:46    [W:0.095 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site