lkml.org 
[lkml]   [2018]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectA weird problem of Realtek r8168 after resume from S3
Hi,
We got an acer laptop which has a problem with ethernet networking after
resuming from S3. The ethernet is popular realtek r8168. The lspci shows as
follows.
02:00.1 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 12)

The problem is the ethernet is not accessible after resume. Pinging via
ethernet always shows the response `Destination Host Unreachable`. However,
the interesting part is, when I run tcpdump to monitor the problematic ethernet
interface, the networking is back to alive. But it's dead again after
I stop tcpdump.
One more thing, if I ping the problematic machine from others, it achieves the
same effect as above tcpdump. Maybe it's about the register setting for RX path?

I tried the latest 4.20 rc version but the problem still there. I
also tried some
hw_reset or init thing in the resume path but no effect. Any
suggestion for this?
Thanks

Chris

\
 
 \ /
  Last update: 2018-12-13 03:21    [W:0.081 / U:1.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site