lkml.org 
[lkml]   [2018]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 6/8] perf cs-etm: Treat NO_SYNC element as trace discontinuity
Date
CoreSight tracer driver might insert barrier packet between different
buffers, thus the decoder can spot the boundaries based on the barrier
packet; the decoder is possible to hit a barrier packet and emit a
NO_SYNC element, then the decoder will find a periodic synchronisation
point inside that next trace block that starts trace again but does not
have the TRACE_ON element as indicator - usually because this block of
trace has wrapped the buffer so we have lost the original point that
trace was enabled.

In upper case, it results in the trace stream only inserts the
OCSD_GEN_TRC_ELEM_NO_SYNC element in the middle of tracing stream, but
we don't handle NO_SYNC element properly and at the end users miss to
see the info for trace discontinuity.

Though OCSD_GEN_TRC_ELEM_NO_SYNC is different from CS_ETM_TRACE_ON when
output from the decoder, but both of them indicate the trace data is
discontinuous; this patch treats OCSD_GEN_TRC_ELEM_NO_SYNC as trace
discontinuity and generates CS_ETM_DISCONTINUITY packet for it, so
cs-etm can handle discontinuity for this case, finally it saves the last
trace data for previous trace block and restart samples for new block.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Robert Walker <robert.walker@arm.com>
---
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 1 -
1 file changed, 1 deletion(-)

diff --git a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
index 1039f364..bee026e 100644
--- a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
+++ b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
@@ -410,7 +410,6 @@ static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer(
case OCSD_GEN_TRC_ELEM_UNKNOWN:
break;
case OCSD_GEN_TRC_ELEM_NO_SYNC:
- break;
case OCSD_GEN_TRC_ELEM_TRACE_ON:
resp = cs_etm_decoder__buffer_discontinuity(decoder,
trace_chan_id);
--
2.7.4
\
 
 \ /
  Last update: 2018-12-11 08:41    [W:0.162 / U:15.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site