lkml.org 
[lkml]   [2018]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5 3/7] mtd: spi-nor: add opcodes for octal Read/Write commands
Date
Hi, Yogesh,

On 12/03/2018 10:39 AM, Yogesh Narayan Gaur wrote:
> - Add opcodes for octal I/O commands
> * Read : 1-1-8 and 1-8-8 protocol
> * Write : 1-1-8 and 1-8-8 protocol
> * opcodes for 4-byte address mode command
>
> - Entry of macros in _convert_3to4_xxx function
>
> - Add flag specifying flash support octal read commands.
>
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
> ---
> Changes for v5:
> - Modified string 'octo' with 'octal'.
> Changes for v4:
> - None
> Changes for v3:
> - Modified string 'octal' with 'octo'.
> Changes for v2:
> - Incorporated review comments of Boris and Vignesh
>
> drivers/mtd/spi-nor/spi-nor.c | 16 ++++++++++++++--
> include/linux/mtd/spi-nor.h | 8 ++++++++
> 2 files changed, 22 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 398d273..7a2176d 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -90,6 +90,7 @@ struct flash_info {
> #define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */
> #define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */
> #define USE_CLSR BIT(14) /* use CLSR command */
> +#define SPI_NOR_OCTAL_READ BIT(15) /* Flash supports Octal Read */
>
> int (*quad_enable)(struct spi_nor *nor);
> };
> @@ -209,6 +210,8 @@ static inline u8 spi_nor_convert_3to4_read(u8 opcode)
> { SPINOR_OP_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B },
> { SPINOR_OP_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B },
> { SPINOR_OP_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B },
> + { SPINOR_OP_READ_1_1_8, SPINOR_OP_READ_1_1_8_4B },
> + { SPINOR_OP_READ_1_8_8, SPINOR_OP_READ_1_8_8_4B },
>
> { SPINOR_OP_READ_1_1_1_DTR, SPINOR_OP_READ_1_1_1_DTR_4B },
> { SPINOR_OP_READ_1_2_2_DTR, SPINOR_OP_READ_1_2_2_DTR_4B },
> @@ -225,6 +228,8 @@ static inline u8 spi_nor_convert_3to4_program(u8 opcode)
> { SPINOR_OP_PP, SPINOR_OP_PP_4B },
> { SPINOR_OP_PP_1_1_4, SPINOR_OP_PP_1_1_4_4B },
> { SPINOR_OP_PP_1_4_4, SPINOR_OP_PP_1_4_4_4B },
> + { SPINOR_OP_PP_1_1_8, SPINOR_OP_PP_1_1_8_4B },
> + { SPINOR_OP_PP_1_8_8, SPINOR_OP_PP_1_8_8_4B },
> };
>
> return spi_nor_convert_opcode(opcode, spi_nor_3to4_program,
> @@ -2093,7 +2098,7 @@ enum spi_nor_read_command_index {
> SNOR_CMD_READ_4_4_4,
> SNOR_CMD_READ_1_4_4_DTR,
>
> - /* Octo SPI */
> + /* Octal SPI */
> SNOR_CMD_READ_1_1_8,
> SNOR_CMD_READ_1_8_8,
> SNOR_CMD_READ_8_8_8,
> @@ -2110,7 +2115,7 @@ enum spi_nor_pp_command_index {
> SNOR_CMD_PP_1_4_4,
> SNOR_CMD_PP_4_4_4,
>
> - /* Octo SPI */
> + /* Octal SPI */
> SNOR_CMD_PP_1_1_8,
> SNOR_CMD_PP_1_8_8,
> SNOR_CMD_PP_8_8_8,
> @@ -3195,6 +3200,13 @@ static int spi_nor_init_params(struct spi_nor *nor,
> SNOR_PROTO_1_1_4);
> }
>
> + if (info->flags & SPI_NOR_OCTAL_READ) {
> + params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
> + spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_8],
> + 0, 8, SPINOR_OP_READ_1_1_8,
> + SNOR_PROTO_1_1_8);
> + }
> +> /* Page Program settings. */
> params->hwcaps.mask |= SNOR_HWCAPS_PP;
> spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],

At the end of spi_nor_init_params we check the conditions for parsing the sfdp.
Shouldn't SPI_NOR_OCTAL_READ trigger the sfdp parsing when SPI_NOR_SKIP_SFDP is
not set?

> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index 8b1acf6..019f534 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -50,9 +50,13 @@

Can you please s/octo/octal on these as well:
$ grep -ni octo include/linux/mtd/spi-nor.h
471: * As a matter of performances, it is relevant to use Octo SPI protocols first,
492:#define SNOR_HWCPAS_READ_OCTO GENMASK(14, 11)
501: * Like (Fast) Read capabilities, Octo/Quad SPI protocols are preferred to the
515:#define SNOR_HWCAPS_PP_OCTO GENMASK(22, 20)

thanks,
ta
\
 
 \ /
  Last update: 2018-12-10 11:45    [W:0.302 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site