lkml.org 
[lkml]   [2018]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/8] phy: mvebu-cp110-comphy: fix port check in ->xlate()
On Fri, Nov 30, 2018 at 03:47:37PM +0100, Miquel Raynal wrote:
> So far the PHY ->xlate() callback was checking if the port was
> "invalid" before continuing, meaning that the port has not been used
> yet. This check is not correct as there is no opposite call to
> ->xlate() once the PHY is released by the user and the port will
> remain "valid" after the first phy_get()/phy_put() calls. Hence, if
> this driver is built as a module, inserted, removed and inserted
> again, the PHY will appear busy and the second probe will fail.
>
> To fix this, just drop the faulty check and instead verify that the
> port number is valid (ie. in the possible range).
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
> index 31b9a1c18345..a40b876ff214 100644
> --- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
> +++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
> @@ -567,9 +567,9 @@ static struct phy *mvebu_comphy_xlate(struct device *dev,
> return phy;
>
> lane = phy_get_drvdata(phy);
> - if (lane->port >= 0)
> - return ERR_PTR(-EBUSY);
> lane->port = args->args[0];
> + if (lane->port >= MVEBU_COMPHY_PORTS)
> + return ERR_PTR(-EINVAL);

Shouldn't we validate args->args[0] before doing anything?

--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up

\
 
 \ /
  Last update: 2018-11-30 20:01    [W:0.118 / U:2.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site