lkml.org 
[lkml]   [2018]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] tty: serial: add driver for the SiFive UART
On Thu, Oct 18, 2018 at 04:43:54PM -0700, Paul Walmsley wrote:
> Add a serial driver for the SiFive UART, found on SiFive FU540 devices
> (among others).
>
> The underlying serial IP block is relatively basic, and currently does
> not support serial break detection. Further information on the IP
> block can be found in the documentation and Chisel sources:
>
> https://static.dev.sifive.com/FU540-C000-v1.0.pdf
>
> https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/uart
>
> This driver was written in collaboration with Wesley Terpstra
> <wesley@sifive.com>.
>
> Boot-tested on a SiFive HiFive Unleashed A00 board.
>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Jiri Slaby <jslaby@suse.com>
> Cc: Palmer Dabbelt <palmer@sifive.com>
> Cc: Wesley Terpstra <wesley@sifive.com>
> Cc: linux-serial@vger.kernel.org
> Cc: linux-riscv@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
> Signed-off-by: Paul Walmsley <paul@pwsan.com>
> ---
> drivers/tty/serial/Kconfig | 24 +
> drivers/tty/serial/Makefile | 1 +
> drivers/tty/serial/sifive.c | 1070 ++++++++++++++++++++++++++++++
> include/uapi/linux/serial_core.h | 3 +
> 4 files changed, 1098 insertions(+)
> create mode 100644 drivers/tty/serial/sifive.c

Seems like the 0-day bot did not like this driver, can you fix up those
build errors and resend?

thanks,

greg k-h

\
 
 \ /
  Last update: 2018-11-09 18:00    [W:0.048 / U:1.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site