[lkml]   [2018]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH anybus v3 4/6] bus: support HMS Anybus-S bus
On Thu, Nov 8, 2018 at 9:07 AM Arnd Bergmann <> wrote:
> It looks like you build your own object management here. Maybe
> use kobject, or at least kref instead of the refcount_t based
> low-level implementation?

Excellent point. I'll replace with krefs.

> I see this is called from the interrupt handler at the moment, which
> means you cannot call sleeping functions, but it also means that
> the timeout may never happen because the timer tick IRQ cannot
> get through. That means you may have to change the irq handler
> logic, e.g. to try this a few times but then defer to a bottom half
> if it fails for a long time.

Touche ! Yes, this is very likely a big problem.

What if I converted the interrupt handler into a threaded interrupt handler?
That would allow the timer tick to get through, correct?

Point taken about cpu_relax(), I will fix.

 \ /
  Last update: 2018-11-08 16:47    [W:0.105 / U:0.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site