lkml.org 
[lkml]   [2018]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] ARM: OMAP1: ams-delta: Drop unused symbols from the board header
Date
Those bitmap symbols defining pins of latch2 register, used with
read()/write() calls before the latch was converted to a GPIO device,
have been obsoleted by integer symbols defined inside the board file.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
---
arch/arm/mach-omap1/board-ams-delta.h | 4 ----
1 file changed, 4 deletions(-)

diff --git a/arch/arm/mach-omap1/board-ams-delta.h b/arch/arm/mach-omap1/board-ams-delta.h
index 06e4c64a47f8..2c3aff824cf0 100644
--- a/arch/arm/mach-omap1/board-ams-delta.h
+++ b/arch/arm/mach-omap1/board-ams-delta.h
@@ -28,10 +28,6 @@

#if defined (CONFIG_MACH_AMS_DELTA)

-#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400
-#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800
-#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000
-
#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0
#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1
#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2
--
2.16.4
\
 
 \ /
  Last update: 2018-11-07 21:17    [W:0.053 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site