lkml.org 
[lkml]   [2018]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND] arm64: dts: meson-axg: fix dtc warning about unit address
Date
section 2.2.1 of the DT specs says: " If the node has no reg property,
the @unit-address must be omitted and the node-name alone differentiates
the node from other nodes at the same level in the tree"

Simply replace the '@' with a '-' to fix this warning.

Cc: Fabio Estevam <festevam@gmail.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---

Hi Kevin,

I'm resending this change because I noticed the previous patch I sent had
references to spdif input which has not been merged yet. This would have
triggered a conflict in your tree.

Hopefully, this new version will apply correctly

Cheers
Jerome

.../arm64/boot/dts/amlogic/meson-axg-s400.dts | 26 +++++++++----------
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 6 ++---
2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 18778ada7bd3..ba44b0419404 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -60,7 +60,7 @@
serial1 = &uart_A;
};

- linein: audio-codec@0 {
+ linein: audio-codec-0 {
#sound-dai-cells = <0>;
compatible = "everest,es7241";
VDDA-supply = <&vcc_3v3>;
@@ -70,7 +70,7 @@
sound-name-prefix = "Linein";
};

- lineout: audio-codec@1 {
+ lineout: audio-codec-1 {
#sound-dai-cells = <0>;
compatible = "everest,es7154";
VDD-supply = <&vcc_3v3>;
@@ -79,14 +79,14 @@
sound-name-prefix = "Lineout";
};

- spdif_dit: audio-codec@2 {
+ spdif_dit: audio-codec-2 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
status = "okay";
sound-name-prefix = "DIT";
};

- dmics: audio-codec@3 {
+ dmics: audio-codec-3 {
#sound-dai-cells = <0>;
compatible = "dmic-codec";
num-channels = <7>;
@@ -272,31 +272,31 @@
<393216000>;
status = "okay";

- dai-link@0 {
+ dai-link-0 {
sound-dai = <&frddr_a>;
};

- dai-link@1 {
+ dai-link-1 {
sound-dai = <&frddr_b>;
};

- dai-link@2 {
+ dai-link-2 {
sound-dai = <&frddr_c>;
};

- dai-link@3 {
+ dai-link-3 {
sound-dai = <&toddr_a>;
};

- dai-link@4 {
+ dai-link-4 {
sound-dai = <&toddr_b>;
};

- dai-link@5 {
+ dai-link-5 {
sound-dai = <&toddr_c>;
};

- dai-link@6 {
+ dai-link-6 {
sound-dai = <&tdmif_c>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-2 = <1 1>;
@@ -317,7 +317,7 @@

};

- dai-link@7 {
+ dai-link-7 {
sound-dai = <&spdifout>;

codec {
@@ -325,7 +325,7 @@
};
};

- dai-link@8 {
+ dai-link-8 {
sound-dai = <&pdm>;

codec {
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index df017dbd2e57..eb46db001ce0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -20,7 +20,7 @@
#address-cells = <2>;
#size-cells = <2>;

- tdmif_a: audio-controller@0 {
+ tdmif_a: audio-controller-0 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_A";
@@ -31,7 +31,7 @@
status = "disabled";
};

- tdmif_b: audio-controller@1 {
+ tdmif_b: audio-controller-1 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_B";
@@ -42,7 +42,7 @@
status = "disabled";
};

- tdmif_c: audio-controller@2 {
+ tdmif_c: audio-controller-2 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_C";
--
2.19.1
\
 
 \ /
  Last update: 2018-11-08 10:52    [W:0.091 / U:2.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site